U.S. ROBOTICS, INC. SPORTSTER 9600/PC, SPORTSTER 9600/PC FAX Card Type Modem (asynchronous) Chipset U.S. Robotics, Inc. Maximum Data Rate 9600bps Maximum Fax Rate 9600bps (fax model only) Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32 Fax Modulation ITU-T V.21CH2, V.27ter, V.29 (fax model only) Error Correction/Compression MNP5, V.42, V.42bis Fax Class Class I (fax model only) Data Bus 8-bit ISA Card Size Full height, one-third length [Image] CONNECTIONS Function Label Function Label Telephone line out CN1 Telephone line in CN2 USER CONFIGURABLE SETTINGS Setting Label Position DTR normal SW1/1 Off DTR forced high SW1/1 On Modem sends verbose result codes SW1/2 Off Modem sends numeric result codes SW1/2 On Result codes enabled SW1/3 On Result codes disabled SW1/3 Off Command mode echo enabled SW1/4 Off Command mode echo enabled SW1/4 On Auto-answer disabled SW1/5 On Auto-answer controlled by S0 SW1/5 Off DCD normal SW1/6 Off DCD forced high SW1/6 On USER CONFIGURABLE SETTINGS (CON'T) Setting Label Position Load settings from profile specified by Y SW1/7 Off command Load settings from factory defaults SW1/7 On Command set enabled SW1/8 On Command set disabled SW1/8 Off SERIAL PORT ADDRESS SELECTION Setting JP1/A JP1/B JP1/C JP1/D 3F8h (COM1:) Closed Open Open Open 2E8h (COM2:) Open Closed Open Open 3F8h (COM3:) Open Open Closed Open 2E8h (COM4:) Open Open Open Closed INTERRUPT SELECTION Setting JP2/A JP2/B JP2/C JP2/D JP2/E 2 Closed Open Open Open Open 3 Open Closed Open Open Open 4 Open Open Closed Open Open 5 Open Open Open Closed Open 7 Open Open Open Open Closed SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, B, D, E, H, L, M, O, V, X, Z &C, &D, &F, &G, &P, &R, &S, &T, &W S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S38 Note: See MHI help file for complete information. Proprietary AT Command Set See U.S. ROBOTICS, INC. SPORTSTER 14,400/PC for a full command summary.