NEWCOM, INC.

NEWTALK DSVD (NO COM IRQ JUMPER)

Card Type                     Modem (asynchronous)
Chipset                       Phylon PHY2000
I/O Options                   Audio line in, audio line out, microphone in,
                              voice, speakerphone, DSVD
Maximum Data Rate             33.6Kbps
Maximum Fax Rate              14.4Kbps
Data Modulation               ITU-T V.22, V.32, V.32bis, V.34
Fax Modulation                ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression  V.42, V.42bis
Fax Class                     Class I
Data Bus                      16-bit ISA
Card Size                     Full height, half length

[Image]

                                CONNECTIONS

          Function            Label            Function             Label

  Telephone line               CN1     Microphone in                CN4

  Telephone line               CN2     Audio line in                CN5

  Audio line out               CN3

                        USER CONFIGURABLE SETTINGS

                  Setting                     Label         Position

  DSP base I/O address is 380h                 JP3          Pins 1 & 2
                                                             closed

  DSP base I/O address is 300h                 JP3          Pins 2 & 3
                                                             closed

                     DSP INTERRUPT SELECTION

  Setting     JP2/A      JP2/B      JP2/C      JP2/D     JP2/E

     7       Closed      Open       Open       Open       Open

    10        Open      Closed      Open       Open       Open

    11        Open       Open      Closed      Open       Open

    12        Open       Open       Open      Closed      Open

    15        Open       Open       Open       Open      Closed

                 SUPPORTED STANDARD COMMANDS

                      Basic AT Commands

  +++, 'comma', A/

  A, D, E, L, M, N, P, Q, T, V, W, X, Z

  &D, &F, &K, &P, &T

                     Extended AT Commands

  %C, %E

                         S-Registers

  S0, S7, S10, S91

            Note: See MHI help file for complete information.

     UNIDENTIFIED COMMANDS

    Command         Default

      S95        Unidentified

                         Proprietary AT Command Set

   See NEWCOM, INC. NEWTALK DSVD (WITH COM IRQ JUMPER) for a full command
                                  summary.