BINTEC COMMUNICATIONS GMBH

BIANCA/PMX

Card Type               ISDN TA
Chipset                 Unidentified
ISDN Transfer Rate      64Kbps x 120 (30 channels per line)
ISDN Protocol           CISCO HDLC, HDLC, T.70, UIFRAMES, X.25, X.30,
                        X.75, PPP
Switch Type             1TR6, DSS1
Data Bus                16-bit ISA
Card Size               Full height, three-quarters length (Full-length
                        with more than two daughtercards)

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Connector to                CN1      Connector to                 CN4
  daughterboard CN5 (port              daughterboard CN5 (port
  1)                                   4)

  Connector to                CN2      Connector to main board      CN5
  daughterboard CN5 (port              CN1-CN4 (on back of
  2)                                   card)

  Connector to                CN3      ISDN PRI interface           CN6
  daughterboard CN5 (port
  3)

                        USER CONFIGURABLE SETTINGS

                  Setting                      Label         Position

  »    Factory configured - do not alter         J4       Pins 2 & 4, 3 &
                                                             5 closed

  »    Factory configured - do not alter         J5       Pins 2 & 4, 3 &
                                                             5 closed

                            INTERRUPT SELECTION

  Setting      J1/A      J1/B      J1/C       J1/D      J1/E       J1/F

      2/9      Open      Open      Open       Open      Open      Closed

       3      Closed     Open      Open       Open      Open       Open

       4       Open     Closed     Open       Open      Open       Open

       5       Open      Open     Closed      Open      Open       Open

       6       Open      Open      Open      Closed     Open       Open

       7       Open      Open      Open       Open     Closed      Open

  »    10      Open      Open      Open       Open      Open       Open

       11      Open      Open      Open       Open      Open       Open

       12      Open      Open      Open       Open      Open       Open

       14      Open      Open      Open       Open      Open       Open

       15      Open      Open      Open       Open      Open       Open

                        INTERRUPT SELECTION (CON'T)

   Setting       J1/G         J1/H        J1/I        J1/J        J1/K

       2/9       Open         Open        Open        Open        Open

        3        Open         Open        Open        Open        Open

        4        Open         Open        Open        Open        Open

        5        Open         Open        Open        Open        Open

        6        Open         Open        Open        Open        Open

        7        Open         Open        Open        Open        Open

  »     10      Closed        Open        Open        Open        Open

        11       Open        Closed       Open        Open        Open

        12       Open         Open       Closed       Open        Open

        14       Open         Open        Open       Closed       Open

        15       Open         Open        Open        Open       Closed

                                  BASE I/O ADDRESS SELECTION

   Setting     SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8  SW1/9   SW1/10

      000000h   On      On      On      On      On      On      On      On     On       On

      001000h   Off     On      On      On      On      On      On      On     On       On

      002000h   On      Off     On      On      On      On      On      On     On       On

      003000h   Off     Off     On      On      On      On      On      On     On       On

      004000h   On      On      Off     On      On      On      On      On     On       On

  »   00D000h   Off     On      Off     Off     On      On      On      On     Off      On

      3FB000h   Off     Off     On      Off    Off     Off     Off     Off     Off     Off

      3FC000h   On      On      Off     Off    Off     Off     Off     Off     Off     Off

      3FD000h   Off     On      Off     Off    Off     Off     Off     Off     Off     Off

      3FE000h   On      Off     Off     Off    Off     Off     Off     Off     Off     Off

      3FF000h   Off     Off     Off     Off    Off     Off     Off     Off     Off     Off

            Note: A total of 1024 base address settings are available. The switches are a
            binary representation of the decimal memory addresses. SW1/10 is the Most
            Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have
            the following decimal values: SW1/10=2,097,152, SW1/9=1,048,576, SW1/8=524,288,
            SW1/7=262,144, SW1/6=131,072, SW1/5=65,536, SW1/4=32,768, SW1/3=16,384,
            SW1/2=8,192, SW1/1=4,096. Turn off the switches and add the values of the
            switches that are off to obtain the correct memory address. (Off=1, On=0)

                          DIAGNOSTIC LED(S)

            The functions and colors of the LEDs are unidentified.