BINTEC COMMUNICATIONS GMBH

BIANCA/BRI-SLC

Card Type              ISDN TA
Chipset                Unidentified
ISDN Transfer Rate     56Kbps x 2/64Kbps x 2
ISDN Protocol          CISCO HDLC, HDLC, T.70, UIFRAMES, X.25, X.30, X.75,
                       PPP
Switch Type            1TR6, DSS1, NET-3, NI-1, VN3
Data Bus               16-bit ISA
Card Size              Full height, half length

[Image]

                CONNECTIONS

       Function               Label

  ISDN S/T interface           CN1

                            INTERRUPT SELECTION

  Setting      J1/A      J1/B      J1/C       J1/D      J1/E       J1/F

      2/9     Closed     Open      Open       Open      Open       Open

       3       Open      Open      Open       Open      Open      Closed

       4       Open      Open      Open       Open     Closed      Open

       5       Open      Open      Open      Closed     Open       Open

       6       Open      Open     Closed      Open      Open       Open

       7       Open     Closed     Open       Open      Open       Open

  »    10      Open      Open      Open       Open      Open       Open

       11      Open      Open      Open       Open      Open       Open

       12      Open      Open      Open       Open      Open       Open

       14      Open      Open      Open       Open      Open       Open

       15      Open      Open      Open       Open      Open       Open

                        INTERRUPT SELECTION (CON'T)

   Setting       J2/A         J2/B        J2/C        J2/D        J2/E

       2/9       Open         Open        Open        Open        Open

        3        Open         Open        Open        Open        Open

        4        Open         Open        Open        Open        Open

        5        Open         Open        Open        Open        Open

        6        Open         Open        Open        Open        Open

        7        Open         Open        Open        Open        Open

  »     10      Closed        Open        Open        Open        Open

        11       Open        Closed       Open        Open        Open

        12       Open         Open       Closed       Open        Open

        14       Open         Open        Open       Closed       Open

        15       Open         Open        Open        Open       Closed

                                 BASE I/O ADDRESS SELECTION

   Setting    SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8  SW1/9   SW1/10

      00000h   On      On      On      On      On      On      On      On     On       On

      00400h   Off     On      On      On      On      On      On      On     On       On

      00800h   On      Off     On      On      On      On      On      On     On       On

      00C00h   Off     Off     On      On      On      On      On      On     On       On

      01000h   On      On      Off     On      On      On      On      On     On       On

  »   0D000h   Off     On      Off     Off     On      On      On      On     Off      On

      FE000h   Off     Off     On      Off    Off     Off     Off     Off     Off     Off

      FF000h   On      On      Off     Off    Off     Off     Off     Off     Off     Off

      FF400h   Off     On      Off     Off    Off     Off     Off     Off     Off     Off

      FF800h   On      Off     Off     Off    Off     Off     Off     Off     Off     Off

      FFC00h   Off     Off     Off     Off    Off     Off     Off     Off     Off     Off

            Note: A total of 1024 base address settings are available. The switches are a
            binary representation of the decimal memory addresses. SW1/10 is the Most
            Significant Bit and switch SW1/1 is the Least Significant Bit. The switches
            have the following decimal values: SW1/10=524,288, SW1/9=262,144,
            SW1/8=131,072, SW1/7=65,536, SW1/6=32,768, SW1/5=16,384, SW1/3=8,192,
            SW1/3=4,096, SW1/2=2,048, SW1/1=1,024. Turn off the switches and add the values
            of the switches that are off to obtain the correct memory address. (Off=1,
            On=0)

                          DIAGNOSTIC LED(S)

            The functions and colors of the LEDs are unidentified.