GLOBAL VILLAGE COMMUNICATIONS TELEPORT 33.6 SPEAKERPHONE Card Type Modem (synchronous/asynchronous) Chipset Unidentified I/O Options Microphone in, speaker out, voice, speakerphone Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell K56+ Fax Modulation ITU-T V.17, V.29 Error Correction/Compression MNP5, V.42, V.42bis Fax Class Class I Data Bus Serial [Image] CONNECTIONS Function Label Function Label Speakerphone button BT1 DC power in CN5 Mute button BT2 Serial port CN6 Speaker out CN1 Microphone MIC Microphone in CN2 Volume control R1 Telephone line out CN3 Power switch SW1 Telephone line in CN4 DIAGNOSTIC LED(S) LED Color Status Condition LED1 Unidentified On Modem is in speakerphone mode LED1 Unidentified Off Modem is not in speakerphone mode LED2 Unidentified On Microphone is muted LED2 Unidentified Blinking Voice messages are waiting LED2 Unidentified Off Microphone is not muted and no messages are waiting LED3 Unidentified On Power is on LED3 Unidentified Blinking Modem is transmitting or receiving data LED3 Unidentified Off Power is off SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, D, E, H, L, M, N, Q, V, W, X, Y, Z &C, &D, &F, &G, &K, &L, &M, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z Extended AT Commands \A, \B, \C, \G, \J, \K, \N, \Q, \T, \V, \X %A, %C, %E, %G Special AT Commands -C, "H, -J, -K, "N, "O S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 S27, S30, S95 Note: See MHI help file for complete information. Proprietary AT Command Set See GLOBAL VILLAGE COMMUNICATIONS TELEPORT 33.6 INTERNET for a full command summary.