WISECOM, INC.

WS-3314ES3

Card Type                    Modem (synchronous/asynchronous)
Chipset                      Rockwell
I/O Options                  Voice, microphone in, speaker out
Maximum Data Rate            33.6Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     External
Fax Class                    Class I
Data Modulation              Bell 103A/212A

                             ITU-T V.22, V.22bis, V.23, V.32, V.32bis,
                             V.34
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  Line in                      CN1     DC power in                  CN4

  Line out                     CN2     Microphone in                CN5

  RS-232/422                   CN3     Speaker out                  CN6

                          DIAGNOSTIC LED(S)

    LED        Color      Status               Condition

     MR         Red         On                Power is on

     MR         Red         Off               Power is off

     TR         Red         On             DTR signal is high

     TR         Red         Off            DTR signal is low

     SD         Red         On         Modem is transmitting data

     SD         Red         Off      Modem is not transmitting data

     RD         Red         On          Modem is receiving data

     RD         Red         Off       Modem is not receiving data

     OH         Red         On             Modem is off-hook

     OH         Red         Off             Modem is on-hook

     CD         Red         On          Carrier signal detected

     CD         Red         Off       Carrier signal not detected

                DIAGNOSTIC LED(S) (CON’T)

   LED      Color    Status           Condition

    RS       Red       On        RTS signal is high

    RS       Red      Off         RTS signal is low

    CS       Red       On        CTS signal is high

    CS       Red      Off         CTS signal is low

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, ‘comma’, A/

  A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z

                           Extended AT Commands

  \A, \B, \K, \N

  %C, %E, %L, %Q

                            Special AT Commands

  +MS

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S21, S22, S23, S24, S25

  S26, S27, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48,
  S82, S86, S91, S92, S95

            Note: See MHI documentation for complete information.

  UNIDENTIFIED COMMANDS

   Command      Default

     S37           0

                         Proprietary AT Command Set

                            DISPLAY INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested about the modem.

    Command                              Function

       I0        Reports product identification code.

       I1        Reports ROM checksum.

       I2        Tests and reports ROM checksum.

       I3        Reports firmware revision and model ID.

       I6        Reports data pump ID.