STONE MICROSYSTEMS (AUSTRALIA) LIMITED AEON-MS Card Type Video card Video Chipset S3 Maximum Video Memory 4MB DRAM (2MB on board, 2MB on video module) I/O Options VGA out (2) Data Bus 16-bit ISA Video Types Supported XVGA Highest Resolution 1280 x 1024 Supported [Image] CONNECTIONS Function Label Function Label Not used J1A 15-pin analog video port J5 1 Header to video module J2A Not used J6A J2B Header to main board J2A J2B Header to video module J7A J7B Unidentified J3 Header to main board J7A J7B 15-pin analog video port J4 Unidentified J8 2 USER CONFIGURABLE SETTINGS Setting Label Position » Port 1 MCS16 decoding uses bits 17-23 SW1/1 Off Port 1 MCS16 decoding uses bits 16-23 SW1/1 On » Port 1 VGA subsystem setup enabled by SW1/2 Off address 46E8h bit 4 Port 1 VGA subsystem setup enabled by SW1/2 On address 46E8h bit 5 » Factory configured - do not alter SW1/3 On » Zero wait stated disabled for port 1 SW1/4 On Zero wait stated enabled for port 1 SW1/4 Off » Factory configured - do not alter SW1/5 Off » Factory configured - do not alter SW1/8 On Card is board 0 SW2/5 Off Card is board 1 SW2/5 On Video BIOS enabled SW2/6 Off Video BIOS disabled SW2/6 On Daughterboards installed (Card SW2/7 Off functions as Aeon-MS) Daughterboards not installed (Card SW2/7 On functions as Aeon-XS3) » Factory configured - do not alter SW2/8 Off » Factory configured - do not alter SW3/1 Off » Factory configured - do not alter SW3/2 Off » Factory configured - do not alter SW3/3 Off » Factory configured - do not alter SW3/4 Off » Factory configured - do not alter SW3/5 Off » Factory configured - do not alter SW3/6 Off » Factory configured - do not alter SW3/7 Off » Factory configured - do not alter SW3/8 Off » Port 2 MCS16 decoding uses bits 17-23 SW4/1 Off Port 2 MCS16 decoding uses bits 16-23 SW4/1 On » Port 2 VGA subsystem setup enabled by SW4/2 Off address 46E8h bit 4 Port 2 VGA subsystem setup enabled by SW4/2 On address 46E8h bit 5 » Factory configured - do not alter SW4/3 On » Zero wait stated disabled for port 2 SW4/4 On Zero wait stated enabled for port 2 SW4/4 Off » Factory configured - do not alter SW4/5 Off » Factory configured - do not alter SW4/8 On Note:The video BIOS may be enabled on only one Aeon card per system. If the system contains another video card then the BIOS must be disabled on all but the last Aeon cards. PORT 1 VERTICAL REFRESH RATE SELECTION Setting SW1/6 SW1/7 43Hz interlaced On On » 56Hz non-interlaced Off On 60Hz non-interlaced On Off 72Hz non-interlaced Off Off PORT 2 VERTICAL REFRESH RATE SELECTION Setting SW4/6 SW4/7 43Hz interlaced On On » 56Hz non-interlaced Off On 60Hz non-interlaced On Off 72Hz non-interlaced Off Off BASE I/O ADDRESS SELECTION Setting SW2/1 SW2/2 SW2/3 SW2/4 100h On On On On » 120h On On On Off 140h On On Off On 160h On On Off Off 180h On Off On On 1A0h On Off On Off 1C0h On Off Off On 1E0h On Off Off Off 200h Off On On On 220h Off On On Off 240h Off On Off On 260h Off On Off Off 280h Off Off On On 2A0h Off Off On Off 2C0h Off Off Off On 2E0h Off Off Off Off DRAM CONFIGURATION The main board and the video module may each contain 1MB or 2MB of video memory. The configuration of this memory is unidentified.