J & J TECHNOLOGY, INC.

JJ.612, JJ.612-1

Card Type                 PCMCIA interface
Chip Set                  Unidentified
I/O Options               PCMCIA Type II slot (JJ.612-1)

                          PCMCIA Type III slot or PCMCIA Type II slots (2)
                          (JJ.612)
Data Bus                  8-bit ISA

[Image]

                                CONNECTIONS

         Function             Label           Function            Label

  PCMCIA interface via         P6       PCMCIA interface via       P7
  proprietary connector                 50-pin header

            Note:A standard PCMCIA slot is provided on an external
            adapter box.

                        USER CONFIGURABLE SETTINGS

                  Setting                      Label         Position

  »    Factory configured - do not alter        JP4          Pins 1 & 2
                                                              closed

  »    Factory configured - do not alter        JP5       Pins 1 & 2, 4 &
                                                             5 closed

  »    Factory configured - do not alter        JP7       Pins 1 & 2, 5 &
                                                             6 closed

            Note:JP1 is located under the faceplate of the external
            PCMCIA drive box.

                       MISCELLANEOUS TECHNICAL NOTES

  Note: Three jumpers JP1, JP2 and JP3 are located on the drive unit
  under the drive unit cover. JP1 sets the base I/O address: 3E0h = open
  (default) or 1E0h = closed. JP2 and JP3 are factory configured and
  should not be altered: JP3 = open and JP2/pins 1 & 2 (pins nearest JP3)
  = closed.