ADC KENTROX DATASMART MAX MODEL 72771 Card Type T1 CSU/DSU Chipset Unidentified T1 Transfer Rate 1.544Mbps T1 Protocol AMI, B8ZS Frame Type SF, ESF, Ericsson Data Bus Serial [Image] CONNECTIONS Function Label Function Label PREVIOUS button BT1 V.24 DTE serial CN7 control port NEXT button BT2 EIA-530 or V.35 serial CN8 data port 1 ESCAPE button BT3 EIA-530 or V.35 serial CN9 data port 2 SELECT button BT4 EIA-530 or V.35 serial CN10 data port 3 Monitor receive port CN1 EIA-530 or V.35 serial CN11 data port 4 Monitor transmit port CN2 Fuse for power source F1 1 T1 line out (Network CN3 Fuse for power source F2 interface) 2 RS-422 auxiliary clock CN4 LCD display LCD port T1 line in (Terminal CN5 PCMCIA slot SL1 interface) V.24 DCE serial control CN6 DC power in (see SC1 port pinout below) Note:Standard V.35 serial ports are available on included adapter cables. SC1 PINOUT Function Screw Function Screw +24 to +48DC power in 1 -24 to -48DC power in 3 (source 1) Ground 2 -24 to -48DC power in 4 (source 2) DIAGNOSTIC LED(S) LED Color Status Condition RXD Yellow On DSU is receiving data from data port indicated by LED1-4 RXD Yellow Off DSU is not receiving data from data port indicated by LED1-4 TXD Yellow On DSU is transmitting data to data port indicated by LED1-4 TXD Yellow Off DSU is not transmitting data to data port indicated by LED1-4 CTS Yellow On Data port indicated by LED1-4 CTS is high CTS Yellow Off Data port indicated by LED1-4 CTS is low RTS Yellow On Data port indicated by LED1-4 RTS is high RTS Yellow Off Data port indicated by LED1-4 RTS is low 1 Yellow On TXD, RXD, CTS, and RTS LEDs indicate status of data port 1 1 Yellow Blinking Loss of Signal detected on data port 1 1 Yellow Off TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 1 2 Yellow On TXD, RXD, CTS, and RTS LEDs indicate status of data port 2 2 Yellow Blinking Loss of Signal detected on data port 2 2 Yellow Off TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 2 3 Yellow On TXD, RXD, CTS, and RTS LEDs indicate status of data port 3 3 Yellow Blinking Loss of Signal detected on data port 3 3 Yellow Off TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 3 4 Yellow On TXD, RXD, CTS, and RTS LEDs indicate status of data port 4 4 Yellow Blinking Loss of Signal detected on data port 4 4 Yellow Off TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 4 DATA Green On Valid data signal detected on T1 network interface DATA Green Off No valid signal detected on T1 network interface RED Red On Loss Of Signal condition detected on T1 network interface RED Red Slow blink Alarm Indication Signal condition detected on T1 network interface RED Red Fast blink T1 network interface signal is out of frame synchronization RED Red Off No red alarm conditions detected on T1 network interface DIAGNOSTIC LED(S) (CON’T) LED Color Status Condition YEL Yellow On Remote Loss Of Signal or out of frame synchronization condition detected on T1 network interface YEL Yellow Off No remote Loss Of Signal or out of frame synchronization condition detected on T1 network interface T1 Green On Valid data signal detected on T1 terminal interface T1 Red On Loss Of Signal, out of frame synchronization, Alarm Indication Signal, or yellow alarm condition detected on T1 terminal interface T1 N/A Off No valid signal detected on T1 terminal interface TEST Yellow On Local loopback test in progress TEST Yellow Blinking Test code, remote loopback, or Bit Error Rate Test in progress TEST Yellow Off No tests are in progress PWR Green On Power is on PWR Red On Self-test failed PWR Green Blinking User is logged in PWR Alternating Blinking Downloading software green/red PWR N/A Off Power is off