VIDEO SEVEN

V7 VEGA VGA (VER. 2)

Card Type                  Video card
Video Chipset              Video Seven
Maximum Video Memory       512KB DRAM
I/O Options                EGA feature connector, light pen port, RF
                           adapter port
Data Bus                   8-bit ISA
Video Types Supported      XVGA
Highest Resolution         800 x 600
Supported

[Image]

                                CONNECTIONS

           Function             Label           Function            Label

  15-pin analog VGA port         J1     Light pen port               J6

  9-pin digital EGA port         J2     RF adapter port              J8

  EGA feature connector          J4

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

  »    EGA mode base I/O address set to 3D0h     P1          Pins 1 & 2
                                                              closed

       EGA mode base I/O address set to 2D0h     P1          Pins 2 & 3
       (reserved)                                             closed

  »    Factory configured - do not alter         P2          Pins 1 & 2
                                                              closed

  »    Card is not installed in XT slot 8        P3          Pins 2 & 3
                                                              closed

       Card is installed in XT slot 8            P3          Pins 1 & 2
                                                              closed

  »    On-board oscillator enabled               P4          Pins 2 & 3
                                                              closed

       Oscillator connected to feature           P4          Pins 1 & 2
       adapter enabled                                        closed

  »    Factory configured - do not alter         P5          Pins 2 & 3
                                                              closed

  »    Factory configured - do not alter         P8          Pins 2 & 3
                                                              closed

  »    Card is primary display                  SW1/4           Off

       Card is secondary display                SW1/4           On

  »    Card auto-detects software video mode    SW1/5           On

       Card is in standard VGA mode             SW1/5           Off

  »    Card is in VGA mode on boot              SW1/6           On

       Card is in CGA or monochrome mode on     SW1/6           Off
       boot

            Note:The two jumpers labeled P2/P8 indicate the locations of
            jumpers P2 and P8. Information of which jumper is in which
            location is unidentified.

                          MONITOR TYPE SELECTION

               Setting                   SW1/1       SW1/2        SW1/3

  »      Auto-detect monitor type         Off         Off          Off

            Nanao 8060/9070, NEC           On         Off          Off
       MultiSync, Princeton UltraSync

            All Mitsubishi, Sony          Off          On          Off
         MultiScan, all Taxan, all
                  Thomson

         NEC Multisync Plus and XL         On          On          Off

          IBM PS/2 Analog Display         Off         Off          On

             IBM Color Display             On         Off          On

        IBM Enhanced Color Display        Off          On          On

          IBM Monochrome Display           On          On          On