VIDEO SEVEN V7 VEGA DELUXE Category Video Video Types Supported EGA Video Processor Unidentified Highest Resolution 752 x 410 Supported Data Bus Type 8-bit ISA Memory Type Unidentified Maximum Onboard Memory 256KB [Image] CONNECTIONS Purpose Location Purpose Location 15-pin analog video CN1 VGA feature CN4 connector connector RCA Video connector CN2 Light pen CN5 1 connector RCA Video connector CN3 2 PRIMARY ADAPTER SELECT Monitor SW1/1 SW1/2 SW1/3 SW1/4 Monochrome Display Off Off On Off Color display/EGA On Off Off On (40 x 25) Color display/EGA Off Off Off On (80 x 25) EGA standard On On On Off EGA enhanced Off On On Off SECONDARY MONOCHROME DISPLAY SELECT Secondary Monitor SW1/1 SW1/2 SW1/3 SW1/4 CGA/EGA (40 x 25) On Off Off On CGA/EGA (80 x 25) Off Off Off On EGA standard On On On Off EGA Enhanced Off On On Off Note: This setup is with the VEGA Deluxe board as primary and a MDA adapter as secondary. VEGA AS SECONDARY DISPLAY SELECT Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 CGA/EGA (40 x 25) On On On On CGA/EGA (80 x 25) Off On On On EGA standard On Off On On EGA Enhanced Off Off On On Note: This setup is with the MDA adapter as primary monitor and VEGA as secondary. VEGA/CGA DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 CGA mode (40 x On On Off On 25) CGA mode (80 x Off On Off On 25) Note: This setup is with the VEGA adapter as primary monitor and CGA as secondary. CGA/VEGA DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 CGA mode (40 x On Off On Off 25) CGA mode (80 x Off Off On Off 25) Note: This setup is with the CGA adapter as primary monitor and VEGA as secondary. DELUXE EMULATION CONFIGURATION Monitor Type SW1/5 VEGA Deluxe functions enable On VEGA Deluxe functions disable Off FACTORY CONFIGURED SETTING Setting JP1 Do not alter N/A SLOT 8 SETTING Setting JP2 Enable Pins 1 & 2 closed Disable Pins 2 & 3 closed Note:Slot 8 on the IBM XT had a different timing than the other 7 slots, this board provides for the option of changing it nature to fit this difference. ADDRESS RANGE SETTING Address JP3 Enable address in the 2XX range Pins 1 & 2 closed Enable address in the 2XX/3XX Pins 2 & 3 closed range FEATURE CONNECTOR CLOCK SETTING Setting JP5 Enable Pins 2 & 3 closed Disable Pins 1 & 2 closed MONITOR TOGGLE SETTING Setting SW2 EGA To the Right CGA or Mono To the Left