TELEBIT CORPORATION

T1000PC

Card Type                    Modem (synchronous/asynchronous)
Processor                    Motorola 68000
Processor Speed              Unidentified
Chipset                      Unidentified
Maximum Data Rate            9600bps
Data Bus                     8-bit ISA
Data Modulation              Bell 103A/212A

                             ITU-T V.22, V.22bis

                             Telebit PEP
Error Correction/Compression MNP5

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Line in                         CN1       Line out                CN2

                        USER CONFIGURABLE SETTINGS

                     Setting                        Label     Position

  Factory configured - do not alter                  JP1     Unidentified

  Factory configured - do not alter                  E25     Unidentified

                         SERIAL PORT CONFIGURATION

    Address         IRQ           E22            E23             E24

  3F8h (COM1:)      IRQ4       Pins 1 & 2     Pins 1 & 2      Pins 2 & 3
                                 closed         closed         closed

  2F8h (COM2:)      IRQ3       Pins 2 & 3     Pins 1 & 2      Pins 1 & 2
                                 closed         closed         closed

  3E8h (COM3:)      IRQ4       Pins 1 & 2     Pins 2 & 3      Pins 2 & 3
                                 closed         closed         closed

  2E8h (COM4:)      IRQ3       Pins 2 & 3     Pins 2 & 3      Pins 1 & 2
                                 closed         closed         closed

                       TRANSMISSION LEVEL SELECTION

               Setting                                 R5

                0 dBm                              4.32K ohm

               -1.5 dBm                            5.11K ohm

                -3 dBm                             6.04K ohm

               -4.5 dBm                            7.15K ohm

                -6 dBm                             8.66K ohm

               -7.5 dBm                            10.2K ohm

                -9 dBm                             12.1K ohm

              -10.5 dBm                            14.3K ohm

               -12 dBm                             16.9K ohm

              -13.5 dBm                            20.5K ohm

               -15 dBm                             24.3K ohm

            Note: R5 is a plug-in resistor that can be used to change the
            transmitted power level.

                   SUPPORTED STANDARD COMMANDS

                        Basic AT Commands

  +++, ‘comma’, A/

  A, C, E, F, H, M, O, V, X, Z

  &F, &T

                           S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12

            Note: See MHI documentation for complete information.

                         Proprietary AT Command Set

  See TELEBIT CORPORATION TRAILBLAZER PLUS PC for a full command summary.