WILDCARD TECHNOLOGIES, INC.

SATISFAXTION MOBILE PDMCIA9025COMBO

Card Type                    Modem (asynchronous), Token Ring
Chipset                      Texas Instruments TMS380C25
Maximum Onboard Memory       160KB DRAM/128KB PROM
Network Transfer Rate        4/16Mbps
Maximum Data Rate            14.4Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     PCMCIA Type II
Fax Class                    Class I & II
Data Modulation              Bell 103A/212A

                             ITU-T V.21, V.22, V.23, V.22bis, V.32,
                             V.32bis
Fax Modulation               Unidentified
Error Correction/Compression MNP5, MNP10, V.42, V.42bis
Topology                     Token Ring
Wire Type                    Shielded/Unshielded twisted pair
Boot ROM                     Not available

                                                                      52772

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, A/

  A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \G, \J, \K, \L, \N, \W

  %C, %L, %Q

                            Special AT Commands

  -K, -Q, *H, )M, @M, :E, +MS

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21,
  S22, S23, S24, S25, S27,

  S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, S41, S46, S48,
  S82, S86, S91, S92, S95,

  S99, S201

                         Proprietary AT Command Set

                              CALLBACK NUMBER

  Type:          Configuration

  Format:        AT [cmds] *Pn:xxxx:<#>

  Description:   Sets callback number at location n with the password
                 xxxx.

                                COMMAND SET

  Type:          Immediate

  Format:        AT [cmds] S80=n [cmds]

  Description:   Selects the active command set.

    Command                              Function

     S80=0        Switch to AT command set.

     S80=33       Switch to V.25bis command set.

                         DISPLAY CALLBACK NUMBERS

  Type:          Immediate

  Format:        AT [cmds] *L [cmds]

  Description:   Displays the list of all callback numbers.

                         END REMOTE CONFIGURATION

  Type:           Immediate

  Format:         AT [cmds] *E [cmds]

  Description:    Ends the remote configuration session currently in
                  progress.

                              PROTOCOL/SPEED

  Type:             Configuration

  Format:           AT [cmds] Fn [cmds]

  Description:      Selects the protocol and speed the modem will attempt
                    to connect at.

     Command                              Function

        F0          Auto-detect the highest common connect speed.

        F1          Select V.21 or Bell 103 at 300bps speed.

        F3          Select V.23 at 75/1200bps speed.

        F4          Select V.22 or Bell 212A at 1200bps speed.

        F5          Select V.22bis at 2400bps speed.

        F6          Select V.32/V.32bis at 4800bps speed.

        F7          Select V.32bis at 7200bps speed.

        F8          Select V.32/V.32bis at 9600bps speed.

        F9          Select V.32bis at 12Kbps speed.

       F10          Select V.32bis at 14.4Kbps speed

                          REMOTE ESCAPE CHARACTER

  Type:                  Register

  Format                 AT [cmds] S202=n [cmds]

  Default:               Unidentified

  Range:                 Unidentified

  Unit:                  1 ASCII character

  Description:           Selects a character to be used for escape
                         sequences during remote configuration sessions.

                       REQUEST REMOTE CONFIGURATION

  Type:           Immediate

  Format:         AT [cmds] *R [cmds]

  Description:    Requests a remote configuration session with the remote
                  modem.

                      Proprietary V.25bis Command Set

                 CALL REQUESTED NUMBER WITH IDENTIFICATION

  Type:                  Immediate

  Format:                CRI<#>

  Description:           Dials the number given. If supported, the
                         modem’s identification string will be sent with
                         the number.

                            EXECUTE AT COMMAND

  Type:          Immediate

  Format:        CNL[AT cmds]

  Description:   Executes an AT command string.

                           IDENTIFICATION STRING

  Type:          Configuration

  Format:        AT [cmds] PRIxxxx [cmds]

  Description:   Sets the modem’s identification string to xxxx.

        See document WILDCARD TECHNOLOGIES, INC. SATISFAXTION MOBILE
                PDMCIA9023COMBO for a full command summary.