TANDY/RADIO SHACK EGA/CGA GRAPHICS BOARD (250-3048A) Card Type Video card Video Processor 6845 Maximum Onboard Memory 256KB DRAM Data Bus 8-bit ISA Video Types Supported EGA Highest Resolution 720 x 350 Supported [Image] CONNECTIONS Function Label 9-pin video out CN1 USER CONFIGURABLE SETTINGS Setting Label Position » EGA mode base I/O address set to 3D0h P3/A Pins 1 & 2 closed EGA mode base I/O address set to 2D0h P3/A Pins 2 & 3 closed » Card is installed in normal slot P3/C Pins 2 & 3 closed Card is installed in XT slot 8 P3/C Pins 1 & 2 closed » Factory configured - do not alter SW1/7 Off » Factory configured - do not alter SW1/8 Off MONITOR TYPE SELECTION Primary Secondary P1 SW1/1 SW1/2 SW1/3 SW1/4 monitor monitor Lo-res CGA Monochrome Pins On Off Off On 2 & 3 Hi-res CGA Monochrome Pins Off Off Off On 2 & 3 Lo-res EGA Monochrome Pins On On On Off 1 & 2 Hi-res EGA Monochrome Pins Off On On Off 1 & 2 Monochrome Lo-res CGA Pins On Off On Off 2 & 3 Monochrome Hi-res CGA Pins Off Off On Off 2 & 3 Note:Pins designated are in the closed position. VIDEO MODE SELECTION Setting SW1/5 SW1/6 Monochrome Off On CGA On Off EGA On On AUTOMODE CONFIGURATION Setting P3/B P3/D » Enabled Pins 2 & 3 closed Pins 1 & 2 closed Disabled Pins 1 & 2 closed Pins 2 & 3 closed