DTK COMPUTER. INC. PTI-206A EGA PRINTER Card Type Parallel card, Video card Video Chip Set Unidentified Highest Resolution 720 x 350 Supported Maximum Video Memory 256KB RAM (type unidentified) Data Bus 8-bit ISA Video Types Supported EGA [Image] CONNECTIONS Function Label Function Label Feature connector J4 25-pin parallel Location port unidentified Light Pen Interface P2 9-pin digital Location video port unidentified USER CONFIGURABLE SETTINGS Function Label Position » Secondary red output on pin 2 of the P1 Pins 1 & 2 direct drive interface connector is closed for use of an enhanced color monitor Pin 2 of the direct drive interface P1 Pins 2 & 3 connector connected to the ground is closed for use of a color monitor » EGA addresses selected at 3XX P3 Pins 1 & 2 closed EGA addresses selected at 2XX (not P3 Pins 2 & 3 supported by BIOS) closed » Factory configured - do not alter SW1/5 On » Factory configured - do not alter SW1/6 On PARALLEL PORT CONFIGURATION Setting JP3 JP4 JP10 » LPT1 Closed Closed Open LPT2 Open Closed Closed Disabled N/A Open N/A EGA ADAPTER CONFIGURATION (PRIMARY) Enhanced Monochrome Color SW1/1 SW1/2 SW1/3 SW1/4 Color Secondary N/A On Off Off On Display 40x25 Color Secondary N/A On Off Off Off Display 80x25 Emulation Secondary N/A Off On On On mode High Res. Secondary N/A Off On On Off Mode Monochrome N/A Secondary Off On Off On 40x25 Monochrome N/A Secondary Off On Off Off 80x25 EGA ADAPTER CONFIGURATION (SECONDARY) Enhanced Monochrome Color SW1/1 SW1/2 SW1/3 SW1/4 Color Primary N/A On On On On Display 40x25 Color Primary N/A On On On Off Display 80x25 Emulation Primary N/A On On Off On mode High Res. Primary N/A On On Off Off Mode Monochrome N/A Primary On Off On On 40x25 Monochrome N/A Primary On Off On Off 80x25 MISCELLANEOUS TECHNICAL NOTES Note: The purpose of SW1/7 and SW1/8 is unidentified.