DECISION COMPUTER INTERNATIONAL CO., LTD. 8 CHANNEL 12/14-BIT D/A CARD Card Type Data acquisition Chipset Signal Processing Technologies I/O Options Analog/digital I/O Data Bus 8-bit ISA [Image] CONNECTIONS Function Label Function Label Analog/digital I/O (see CN1 Channel 5 reference VR5 pinout below) voltage Channel 1 reference VR1 Channel 6 reference VR6 voltage voltage Channel 2 reference VR2 Channel 7 reference VR7 voltage voltage Channel 3 reference VR3 Channel 8 reference VR8 voltage voltage Channel 4 reference VR4 voltage J1 PINOUT Function Pin Function Pin +12V DC power 1 -12V DC power 14 Not used 2 Not used 15 Ground 3 Analog-to-digital channel 16 8 current Analog-to-digital channel 4 Analog-to-digital channel 17 8 voltage 7 current Analog-to-digital channel 5 Analog-to-digital channel 18 7 voltage 6 current Analog-to-digital channel 6 Analog-to-digital channel 19 6 voltage 5 current Analog-to-digital channel 7 Analog-to-digital channel 20 5 voltage 4 current Analog-to-digital channel 8 Analog-to-digital channel 21 4 voltage 3 current Analog-to-digital channel 9 Analog-to-digital channel 22 3 voltage 2 current Analog-to-digital channel 10 Analog-to-digital channel 23 2 voltage 1 current Analog-to-digital channel 11 Ground 24 1 voltage Ground 12 -5V DC power 25 +5V DC power 13 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter SW1/7 Off » Factory configured - do not alter SW1/8 Off » Channel 1 voltage is 0V to 9V JPA1 Pins 3 & 4 closed Channel 1 voltage is -9V to 9V JPA1 Pins 1 & 2 closed » Channel 2 voltage is 0V to 9V JPA2 Pins 3 & 4 closed Channel 2 voltage is -9V to 9V JPA2 Pins 1 & 2 closed » Channel 3 voltage is 0V to 9V JPA3 Pins 3 & 4 closed Channel 3 voltage is -9V to 9V JPA3 Pins 1 & 2 closed » Channel 4 voltage is 0V to 9V JPA4 Pins 3 & 4 closed Channel 4 voltage is -9V to 9V JPA4 Pins 1 & 2 closed » Channel 5 voltage is 0V to 9V JPA5 Pins 3 & 4 closed Channel 5 voltage is -9V to 9V JPA5 Pins 1 & 2 closed » Channel 6 voltage is 0V to 9V JPA6 Pins 3 & 4 closed Channel 6 voltage is -9V to 9V JPA6 Pins 1 & 2 closed » Channel 7 voltage is 0V to 9V JPA7 Pins 3 & 4 closed Channel 7 voltage is -9V to 9V JPA7 Pins 1 & 2 closed » Channel 8 voltage is 0V to 9V JPA8 Pins 3 & 4 closed Channel 8 voltage is -9V to 9V JPA8 Pins 1 & 2 closed » Factory configured - do not alter JPB1 Open » Factory configured - do not alter JPB2 Open » Factory configured - do not alter JPB3 Open » Factory configured - do not alter JPB4 Open » Factory configured - do not alter JPB5 Open » Factory configured - do not alter JPB6 Open » Factory configured - do not alter JPB7 Open » Factory configured - do not alter JPB8 Open BASE I/O ADDRESS Setting SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 000h On On On On On On 010h On On On On On Off 020h On On On On Off On 030h On On On On Off Off 040h On On On Off On On » 2B0h Off On Off On Off Off 3B0h Off Off Off On Off Off 3C0h Off Off Off Off On On 3D0h Off Off Off Off On Off 3E0h Off Off Off Off Off On 3F0h Off Off Off Off Off Off Note: A total of 64 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/1 is the Most Significant Bit and switch SW1/6 is the Least Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0) WAIT STATES Setting JP9/A JP9/B JP9/C JP9/D 0 Closed Open Open Open 1 Open Closed Open Open 2 Open Open Closed Open 3 Open Open Open Closed DIAGNOSTIC LED(S) The function of the LED is unidentified.