EQUINOX SYSTEMS, INC.

MEGAPLEX MCC 24X4

Card Type        Cluster controller
Chip Set         Unidentified
I/O Options      Cluster ports (4), daisy-chain connectors
Data Bus         16-bit ISA

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  Cluster port 1            CN1      Cluster port 4                CN4

  Cluster port 2            CN2      Daisy-chain connector         J7
                                     (see pinout below)

  Cluster port 3            CN3

                                 J7 PINOUT

         Function             Pin             Function             Pin

  Signal in                    1       Signal out                   2

            Note:To connect a MEGAPLEX board to a MEGAPORT board, connect
            pin 2 of J7 on the MEGAPLEX to pin 7 of J2 on the MEGAPORT.

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

  »   Card is installed in ISA slot              A0            Open

      Card is installed in EISA slot             A0           Closed

  »   Factory configured - do not alter          A1            Open

  »   Factory configured - do not alter          A2            Open

                   DIAGNOSTIC LED(S)

            The function of the LEDs is unidentified.