MOTOROLA, INC. 6520/6560 MPROUTER T1/E1 DUAL PORT CARD Card Type T1 or E1 CSU/DSU Chip Set Unidentified I/O Options MVIP bus Transfer Rate 1.544Mbps x 2 for T1, 2.048Mbps x 2 for E1 Data Bus 16-bit ISA [Image] CONNECTIONS Function Label Function Label Line 1 CN1 Diagnostic port (not used) CN3 Line 2 CN2 MVIP bus CN4 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter SW1/1 On » Factory configured - do not alter SW1/2 On » Factory configured - do not alter SW1/3 On » Factory configured - do not alter SW1/4 On » Factory configured - do not alter SW1/5 On » Factory configured - do not alter SW1/6 Off » Factory configured - do not alter SW1/7 Off » Factory configured - do not alter SW1/8 Off » Factory configured - do not alter SW1/9 Off » Factory configured - do not alter SW1/10 On DIAGNOSTIC LED(S) LED Color Status Condition LED1 Yellow On Carrier signal not detected on line 1 LED1 Yellow Off Carrier signal detected on line 1 LED2 Yellow On Carrier signal not detected on line 2 LED2 Yellow Off Carrier signal detected on line 2 LED3 Green On Card is operating normally LED3 Green Off Card has failed LED4 Yellow On Card has failed LED4 Yellow Off Card is operating normally MISCELLANEOUS TECHNICAL NOTE This card is designed for use in Motorola’s 6520/6560 MPRouter system and will not function in another system. See documents M3596 and M3597 for more information.