MITSUMI ELECTRONICS INTERFACE CARD Card Type CD-ROM interface card Chip Set Unidentified Maximum Onboard Memory None I/O Options Audio in, audio (2), CD-ROM interface connector Data Bus 16-bit ISA Floppy drives supported None [Image] CONNECTIONS Function Label Function Label Audio in CN1 Audio left channel J1 CD-ROM interface connector CN2 Audio right channel J2 BASE I/O ADDRESS SELECTION Setting SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 » 300h Off Off On On On On On On 304h Off Off On On On On On Off 308h Off Off On On On On Off On 30Ch Off Off On On On On Off Off 310h Off Off On On On Off On On 3ECh Off Off Off Off Off On Off Off 3F0h Off Off Off Off Off Off On On 3F4h Off Off Off Off Off Off On Off 3F8h Off Off Off Off Off Off Off On 3FCh Off Off Off Off Off Off Off Off Note:A total of 255 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, and SW1/8=4. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0) DMA CHANNEL SELECTION Channel JP1/A JP1/B JP1/C » 5 Closed Open Open 6 Open Closed Open 7 Open Open Closed INTERRUPT SELECTION IRQ JP2/A JP2/B JP2/C JP2/D JP2/E 2/9 Closed Open Open Open Open 3 Open Closed Open Open Open 5 Open Open Closed Open Open » 10 Open Open Open Closed Open 11 Open Open Open Open Closed MISCELLANEOUS TECHNICAL NOTE Note: This interface card work in conjunction with the Mitsumi Internal CD-ROM drive (Ver.1.0).