ALLOY COMPUTER PRODUCTS, INC.

IMP8

Card Type               I/O controller
Chip Set                None
Maximum Onboard Memory  Unidentified
I/O Options             Terminal connector
Data Bus                16-bit ISA
Floppy drives supported None

[Image]

                                CONNECTIONS

                Function                              Label

  37-pin connector                                     CN1

            Note: CN1 is used to connect the IMP8 & the Terminal Array
            Panel together for Alloy’s NX386 operating system. The
            Terminal Array Panel contains eight terminal connectors
            (DB-9) & eight parallel/serial connectors (DB-25).

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   First IMP8 board installed                 JP1          Closed

      Second IMP8 board installed                JP1           Open

  Note: Only remove the jumper from JP1 on the second board installed in
  any system.

                     MISCELLANEOUS TECHNICAL NOTE

            Note: The exact type & amount of memory is unidentified.