UNIDENTIFIED

CT-6260H

Card Type                Multi-I/O
Chipset                  Unidentified
I/O Options              Floppy drive interface, parallel port, serial
                         ports (2), clock/calendar
Data Bus                 8-bit ISA
Floppy Drives Supported  Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

          Function            Label            Function             Label

  Serial port 2                J1     Floppy interface               J3

  Serial port 1                J2     Parallel port                  J4

                        USER CONFIGURABLE SETTINGS

                 Setting                    Label          Position

  »   Factory configured - do not alter      JP7         Unidentified

  »   Factory configured - do not alter      JP8         Unidentified

  »   Floppy BIOS enabled                    JP9       Pins 1 & 2 closed

      Floppy BIOS disabled                   JP9       Pins 2 & 3 closed

  »   Factory configured - do not alter      JP10        Unidentified

      Drive A: is 3.5"                       JP11      Pins 1 & 2 closed

      Drive A: is 5.25"                      JP11      Pins 2 & 3 closed

      Drive B: is 3.5"                       JP12      Pins 1 & 2 closed

      Drive B: is 5.25"                      JP12      Pins 2 & 3 closed

  »   Factory configured - do not alter      JP13        Unidentified

     PARALLEL PORT ADDRESS SELECTION

       Setting               JP1

        378h          Pins 2 & 3 closed

        278h          Pins 1 & 2 closed

      Disabled               Open

         CLOCK ADDRESS SELECTION

       Setting               JP2

        377h          Pins 2 & 3 closed

        277h          Pins 1 & 2 closed

      Disabled               Open

     SERIAL PORT 1 ADDRESS SELECTION

       Setting               JP3

    3F8h (COM1:)      Pins 2 & 3 closed

    2F8h (COM2:)      Pins 1 & 2 closed

      Disabled               Open

                      SERIAL PORT INTERRUPT SELECTION

     Port 1           Port 2              JP4                 JP6

      IRQ4             IRQ3         Pins 2 & 3 closed  Pins 1 & 2 closed

      IRQ4             None         Pins 2 & 3 closed         Open

      IRQ3             IRQ4         Pins 1 & 2 closed  Pins 2 & 3 closed

      IRQ3             None               Open         Pins 2 & 3 closed

      None             IRQ4         Pins 1 & 2 closed         Open

      None             IRQ3               Open         Pins 1 & 2 closed

     SERIAL PORT 2 ADDRESS SELECTION

       Setting               JP5

    3F8h (COM1:)      Pins 1 & 2 closed

    2F8h (COM2:)      Pins 2 & 3 closed

      Disabled               Open