STB SYSTEMS, INC. EGA MULTI RES Card Type Multi-I/O card Chip Set Unidentified Maximum Onboard Memory 256KB I/O Options EGA video port, light pen, parallel port Data Bus 8-bit ISA [Image] CONNECTIONS Function Label Function Label Battery connector J1 Parallel port P4 Light pen connector J5 Clock generator socket U5 9-pin digital video P3 connector USER CONFIGURABLE SETTINGS Function Label Position » EGA monitor connected to Multi Res J2 Pins 1 & 2 adapter closed CGA/Monochrome monitor connected to J2 Pins 2 & 3 Multi Res adapter closed » Factory configured - do not alter J4 Pins 2 & 3 closed Note: Jumper J4 configures the adapter for all display types. Alternate settings are unidentified. DISPLAY CONFIGURATION Display Mode SW1/1 SW1/2 SW1/3 SW1/4 Monochrome Monochrome Off Off On Off CGA 40x25 On Off Off On CGA 80x25 Off Off Off On EGA 8x8 text On On On Off EGA 8x14 text Off On On Off Note: These settings are for systems where the EGA Multi Res is the sole adapter in the system. DISPLAY CONFIGURATION Primary Secondary Display/Mode SW1/1 SW1/2 SW1/3 SW1/4 Display/Mode CGA/40x80 Monochrome/Monochrome On Off Off On CGA/80x25 Monochrome/Monochrome Off Off Off On EGA/8x8 text Monochrome/Monochrome On On On Off EGA/8x14 text Monochrome/Monochrome Off On On Off Note: These settings are for systems where the EGA Multi Res is the primary adapter in the system and a monochrome/printer card is the secondary adapter. DISPLAY CONFIGURATION Primary Display/Mode Secondary SW1/1 SW1/2 SW1/3 SW1/4 Display/Mode Monochrome/Monochrome CGA/40x25 On On On On Monochrome/Monochrome CGA/80x25 Off On On On Monochrome/Monochrome EGA/8x8 text On Off On On Monochrome/Monochrome EGA/8x14 text Off Off On On Note: These settings are for systems where the EGA Multi Res is the secondary adapter in the system and a monochrome/printer card is the primary adapter. DISPLAY CONFIGURATION Primary Display/Mode Secondary SW1/1 SW1/2 SW1/3 SW1/4 Display/Mode Monochrome/Monochrome CGA/40x25 On Off On Off Monochrome/Monochrome CGA/80x25 Off Off On Off Note: These settings are for systems where the EGA Multi Res is the primary adapter in the system and a CGA card is the secondary adapter. DISPLAY CONFIGURATION Primary Secondary Display/Mode SW1/1 SW1/2 SW1/3 SW1/4 Display/Mode CGA/40x25 Monochrome/Monochrome On On Off On CGA/80x25 Monochrome/Monochrome Off On Off On Note: These settings are for systems where the EGA Multi Res is the secondary adapter in the system and a CGA card is the primary adapter. EGA MONITOR CONFIGURATION Setting SW1/7 SW1/8 » Normal 25KHz monitors Off On Dyneer 140HI Off Off PARALLEL PORT ADDRESS SELECTION Setting SW1/5 SW1/6 LPT1 On On LPT2 On Off LPT3 Off On Disabled Off Off