MOTOROLA, INC. 2430I Card Type Modem (synchronous/asynchronous) Chip Set Unidentified Maximum Data Rate 2400bps Data Bus External Data Modulation Bell Protocol ITU-T V.22, V.23 [Image] CONNECTIONS Function Label Function Label Line out CN1 V.24/V.35 connector CN2 Note: The function and number of buttons is unidentified. USER CONFIGURABLE SETTINGS Setting Label Position Chassis ground connected to signal JP1 Pins 2 & 3 closed ground Chassis ground not connected to signal JP1 Pins 1 & 2 closed ground RTS flow control enabled JP2 Pins 2 & 3 closed Software flow control enabled JP2 Pins 1 & 2 closed Line in relay disabled JP3 Pins 2 & 3 closed Line in relay enabled JP3 Pins 1 & 2 closed Factory configured - do not alter S2/1 Unidentified Factory configured - do not alter S2/2 Unidentified Factory configured - do not alter S2/3 Unidentified Factory configured - do not alter S2/4 Unidentified Factory configured - do not alter S2/5 Unidentified Line impedance set to 600 ohms S2/6 On Line impedance set to 900 ohms S2/6 Off LINE TYPE Setting JP4 JP5 Switched line Pins 1 & 2 closed Pins 2 & 3 closed Leased line Pins 2 & 3 closed Pins 1 & 2 closed TRANSMISSION LEVEL Setting S2/1 S2/2 S2/3 S2/4 0dBm Off Off Off Off -1dBm On Off Off Off -2dBm Off On Off Off -3dBm On On Off Off -4dBm Off Off On Off -5dBm On Off On Off -6dBm Off On On Off -7dBm On On On Off -8dBm Off Off Off On -9dBm On Off Off On -10dBm Off On Off On -11dBm On On Off On -12dBm Off Off On On -13dBm On Off On On -14dBm Off On On On -15dBm On On On On