EICON TECHNOLOGY CORPORATION

EICONCARD/PC 1MB

Card Type              Serial X.25
Processor              68008 (exact location unidentified)
Processor Speed        10MHz
Maximum Onboard Memory 1MB RAM
I/O Options            Serial port
Data Bus               8-bit ISA

[Image]

                                CONNECTIONS

               Function                               Label

  V.24, V.28, or X.21 port                             CN1

            Note: V.28 and X.21 port configurations are provided by
            included adapter cables.

                        USER CONFIGURABLE SETTINGS

                  Setting                       Label        Position

  »   Electrical ground connected to             J1          Pins 1 & 2
      signal ground                                           closed

      Electrical ground not connected to         J1          Pins 3 & 4
      signal ground                                           closed

  »   Card will use primary I/O address         SW1/1           Off

      Card will use secondary I/O address       SW1/1           On

                             BASE I/O ADDRESS

     Primary         Secondary        SW1/2        SW1/3         SW1/4

         278h          678h            Off          Off           Off

         280h          680h            Off          Off           On

         378h          778h            Off           On           Off

  »      380h          780h            Off           On           On

         380h          780h             On          Off           Off

         388h          788h             On          Off           On

         390h          790h             On           On           Off

         398h          798h             On           On           On

            Note: If a card is set to use a secondary address, no other
            card in the system may be set to its associated primary
            address except for another EiconCard.