EICON TECHNOLOGY CORPORATION

EICON/G. DIEHL QUADRO

Card Type                ISDN TA
Chip Set                 Unidentified
Transfer Rate            64Kbps x 4
Data Bus                 16-bit ISA
ISDN Protocol            1TR6, ATEL, AT&T, Northern, DMS100, DSS1, ETSI,
                         Q.931, other country specific

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  ISDN line 1                  CN1     ISDN line 3                  CN3

  ISDN line 2                  CN2     ISDN line 4                  CN4

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

  »   Factory configured - do not alter      SW1/1              On

  »   Factory configured - do not alter      SW1/2              On

                        BASE I/O ADDRESS SELECTION

  Setting     SW1/3      SW1/4     SW1/5     SW1/6      SW1/7     SW1/8

   8000h        On        On        On         On        On         On

   8200h       Off        On        On         On        On         On

   8400h        On        Off       On         On        On         On

   8600h       Off        Off       On         On        On         On

   8800h        On        On        Off        On        On         On

   D000h        On        On        On        Off        On        Off

   F600h       Off        Off       On        Off        Off       Off

   F800h        On        On        Off       Off        Off       Off

   FA00h       Off        On        Off       Off        Off       Off

   FC00h        On        Off       Off       Off        Off       Off

   FE00h       Off        Off       Off       Off        Off       Off

            Note:A total of 64 base address settings are available. The
            switches are a binary representation of the decimal memory
            addresses. SW1/8 is the Most Significant Bit and switch SW1/3
            is the Least Significant Bit. The switches have the following
            decimal values: SW1/8=16384, SW1/7=8192, SW1/6=4096,
            SW1/5=2048, SW1/4=1024, SW1/3=512. Turn switches off and add
            their values to a base value of 32768. Convert to hexadecimal
            to obtain the correct memory address. (Off=1, On=0)

                                 INTERRUPT

  IRQ   JP1/A    JP1/B   JP1/C    JP1/D   JP1/E    JP1/F   JP1/G   JP1/H

  2     Open     Open    Open     Open    Open     Open    Open    Pins 1
                                                                    & 2

  3     Open     Open    Open     Open    Open     Open     Pins    Open
                                                           1 & 2

  4     Open     Open    Open     Open    Open     Pins    Open     Open
                                                   1 & 2

  5     Open     Open    Open     Open     Pins    Open    Open     Open
                                          1 & 2

  7     Open     Open    Open     Pins    Open     Open    Open     Open
                                  1 & 2

  10    Open     Open     Pins    Open    Open     Open    Open     Open
                         1 & 2

  11    Open     Pins    Open     Open    Open     Open    Open     Open
                 1 & 2

  12     Pins    Open    Open     Open    Open     Open    Open     Open
        1 & 2

            Note:Pins designated are in the closed position.