WESTERN DATACOM COMPANY, INC. WORLDCOM 202 Card Type Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 1200bps Data Bus External Data Modulation Protocol Bell 202 ITU-T V.23 [Image] CONNECTIONS Function Label Function Label Serial port CN1 Line in/out CN4 DC power CN2 Volume control R1 Line in/out CN3 Power switch SW1 USER CONFIGURABLE SETTINGS Setting Label Position Auto-answer enabled SW2/1 On Auto-answer disabled SW2/1 Off Factory configured - do not alter SW2/4 N/A Factory configured - do not alter SW2/5 N/A Power-up with user configuration SW2/6 Off Power-up with factory configuration SW2/6 On RTS signal normal SW2/7 Off RTS signal forced high SW2/7 On DTR signal normal SW2/8 Off DTR signal forced high SW2/8 On Factory configuration 0 - normal use SW3 Off Factory configuration 1 - for analog loop-back SW3 On tests Note: The exact location and orientation of SW2 is unidentified. SECONDARY WIRE PAIR (MODE INDICATE) Setting SW2/2 SW2/3 Secondary pair not used Off Off Secondary pair used On On DIAGNOSTIC LED(S) LED Color Status Condition LED1 Unidentified On Modem is off-hook LED1 Unidentified Off Modem is on-hook LED2 Unidentified On DSR signal is high LED2 Unidentified Off DSR signal is low LED3 Unidentified On DTR signal is high LED3 Unidentified Off DTR signal is low LED4 Unidentified On RTS signal is high LED4 Unidentified Off RTS signal is low