WESTERN DATACOM COMPANY, INC. 825 CRYPTO NET Card Type Data encryption (synchronous) Chip Set Unidentified I/O Options Control port, backup port (not used) Maximum Data Rate 64Kbps x 2 Data Bus External Encryption Type Single DES [Image] CONNECTIONS Function Label Function Label RS-232 for control port CN1 RS-232 for control port CN5 1 2 V.35 from DTE 1 CN2 V.35 from DTE 2 CN6 V.35 to modem/DSU 1 CN3 V.35 to modem/DSU 2 CN7 Backup port 1 (not used) CN4 Backup port 2 (not CN8 used) DIAGNOSTIC LED(S) LED Color Status Condition TXD1 Red On Modem is transmitting data on line 1 TXD1 Red Off Modem is not transmitting data on line 1 RXD1 Red On Modem is receiving data on line 1 RXD1 Red Off Modem is not receiving data on line 1 RTS1 Red On RTS signal is high on port 1 RTS1 Red Off RTS signal is low on port 1 CTS1 Red On CTS signal is high on port 1 CTS1 Red Off CTS signal is low on port 1 DSR1 Red On DSR signal is high on port 1 DSR1 Red Off DSR signal is low on port 1 DTR1 Red On DTR signal is high on port 1 DTR1 Red Off DTR signal is low on port 1 RI1 Red On Line 1 is ringing RI1 Red Off Line 1 is not ringing DCD1 Red On Carrier signal detected DCD1 Red Off Carrier signal not detected SL1 Red On Line 1 is active SL1 Red Off Line 1 is not active TXD2 Red On Modem is transmitting data on line 2 TXD2 Red Off Modem is not transmitting data on line 2 RXD2 Red On Modem is receiving data on line 2 RXD2 Red Off Modem is not receiving data on line 2 RTS2 Red On RTS signal is high on port 2 RTS2 Red Off RTS signal is low on port 2 CTS2 Red On CTS signal is high on port 2 CTS2 Red Off CTS signal is low on port 2 DSR2 Red On DSR signal is high on port 2 DSR2 Red Off DSR signal is low on port 2 DTR2 Red On DTR signal is high on port 2 DTR2 Red Off DTR signal is low on port 2 RI2 Red On Line 2 is ringing RI2 Red Off Line 2 is not ringing DCD2 Red On Carrier signal detected DCD2 Red Off Carrier signal not detected SL2 Red On Line 2 is active SL2 Red Off Line 2 is not active PWR Red On Power is on PWR Red Off Power is off Proprietary Command Set BIT-MAPPED REGISTER 1 Format: SET REG 1 n Default: 6 Range: 0 - 7 Description: Controls encoding, idle character, and clock gapping. Bit Value Function 0 0 Use NRZ encoding. 1 Use NRZI encoding. 1 0 Use Mark character for idle. 1 Use Flag character for idle. 2 0 Clock gapping disabled. 1 Clock gapping enabled. DISPLAY CONFIGURATION Type: Immediate Format: SHOW REGS Description: Displays all registers for the current configuration. DISPLAY SERIAL NUMBER Type: Immediate Format: SHOW S/N Description: Displays the serial number for this modem. DTR SIGNAL Type: Configuration Format: SET REG 2 n Description: Controls the behaviour of the DTR signal. Command Function SET REG 2 0 DTR normal. SET REG 2 1 DTR forced high. ENCRYPTION KEY RESET Type: Configuration Format: INIT KEY Description: Resets the encryption key back to the factory default of "0123456789ABCDEF". ENCRYPTION KEY SET Type: Configuration Format: SET KEY xxxxxxxxxxxxxxxx Description: Sets the 16 character encryption key. LOCAL SERIAL PORT SPEED Type: Configuration Format: SET REG 0 n Description: Sets the speed of the local serial port. Command Function SET REG 0 0 Set speed to 56Kbps. SET REG 0 1 Set speed to 64Kbps. SET REG 0 2 Set speed to 96Kbps. SET REG 0 3 Set speed to 128Kbps. SET REG 0 4 Set speed to 192Kbps. SET REG 0 5 Set speed to 256Kbps. MODEM ID DISPLAY Type: Immediate Format: SHOW ID Description: Displays the 8 character identification string for this modem. MODEM ID SET Type: Configuration Format: SET ID xxxxxxxx Description: Sets the 8 character identification string for this modem. REGISTER DISPLAY Type: Immediate Format: SHOW REG n Description: Displays the setting of register n. REGISTER RESET Type: Immediate Format: INIT REGS Description: Resets all registers to their factory configuration.