SUPRA DIAMOND SUPRAFAX MODEM 288 Card Type Fax, Modem (synchronous/asynchronous) Chip Set Rockwell Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Protocol Bell 103/212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation Protocol ITU-T V.17, V.21, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, MNP10, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label Line out CN1 DC power CN4 Line in CN2 Power switch SW1 RS-232/422 CN3 DIAGNOSTIC LED(S) LED Color Status Condition OH Red On Modem is off-hook OH Red Off Modem is on-hook RD Red On Modem is receiving data RD Red Off Modem is not receiving data SD Red On Modem is transmitting data SD Red Off Modem is not transmitting data PWR Red On Power is on PWR Red Off Power is off ALPH-NUMERIC DISPLAY Display Condition OK Modem is ready AA Auto-answer enabled DI Modem dialing a number RI Phone is ringing CD Carrier signal detected and modem is connected LP LAPM error correction activated DC Data compression activated V34 V.34 (non-asymmetric) connection R34 Modem is receiving data. When a nn follows, this indicates the receive speed. T34 Modem is transmitting data. When a nn follows, this indicates the transmit speed. VF Modem is connected using V.FC protocol 28 Modem connected at 28.8Kbps 26 Modem connected at 26.4Kbps 24 Modem connected at 24Kbps, if this number follows V34, T34 or R34 216 Modem connected at 21.6Kbps 192 Modem connected at 19.2Kbps 168 Modem connected at 16.8Kbps 144 Modem connected at 14.4Kbps 120 Modem connected at 12Kbps 96 Modem connected at 9600bps 48 Modem connected at 4800bps 24 Modem connected at 2400bps, if this number doesn’t follows V34, T34 or R34 12 Modem connected at 1200bps 3 Modem connected at 300bps RE Receive error, local modem asking to retransmit data TE Transmission error, remote modem asking to resend data RT Either modem has requested to retrain FX Modem is connected in FAX mode Proprietary AT Command Set See document V1998 for a full command summary.