PROMETHEUS HOME OFFICE 144I Card Type Fax, Modem (asynchronous), Voice Chip Set Unidentified I/O Options Speakerphone, Voice-mail Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 8-bit ISA Fax Class Class I & II Data Modulation Protocol Bell 103/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation Protocol ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label Line in CN1 Speaker out CN3 Line out CN2 Microphone in CN4 USER CONFIGURABLE SETTINGS Function Label Position Speaker plug - normal JP2 Closed Speaker plug - monaural JP2 Open SERIAL PORT ADDRESS Setting JP1/A JP1/B COM1 (3F8h) Open Open COM2 (2F8h) Closed Open COM3 (3E8h) Open Closed COM4 (2E8h) Closed Closed INTERRUPT Setting JP1/C JP1/D JP1/E JP1/F 2 Closed Open Open Open 3 Open Closed Open Open 4 Open Open Closed Open 5 Open Open Open Closed Proprietary AT Command Set AUTO-RELIABLE FALLBACK CHARACTER Type: Configuration Format: AT [cmds] %An [cmds] Default: Unidentified Range: 0-127 Unit: ASCII Description: Sets the character used as the auto-reliable fallback character; %A0 will disable this function. AUTO-RELIABLE TIME BUFFER CONFIGURATION Type: Configuration Format: AT [cmds] \Cn [cmds] Description: Controls the handling of incoming data during auto-reliable time period Command Function \C0 Data is discarded \C1 Data is buffered \C2 Data is discarded; modem returns to normal mode on receiving auto-reliable fallback character. AUTO-RETRAIN Type: Configuration Format: AT [cmds] %En [cmds] Description: Controls auto-retrain mode Command Function %E0 Auto-retrain disabled %E1 Auto-retrain enabled BREAK TYPE Type: Configuration Format: AT [cmds] \Kn [cmds] Default: 5 Range: 0-5 Description: Configures action of break signal COMPRESSION Type: Configuration Format: AT [cmds] %Cn [cmds] Description: Selects data compression Command Function %C0 Data compression disabled %C1 MNP5 enabled CONNECT MODE Type: Configuration Format: AT [cmds] \Nn [cmds] Description: Controls the type of connection the modem will operate in Command Function \N0 Normal mode enabled \N1 Direct mode enabled \N2 MNP reliable mode enabled \N3 Auto-reliable mode enabled \N4 V.42 reliable mode enabled \N5 V.42 auto-reliable mode enabled \N6 Reliable mode enabled DICTIONARY SIZE Type: Configuration Format: AT [cmds] %Dn [cmds] Description: Select dictionary size Command Function %D0 Select 1/2K dictionary %D1 Select 1K dictionary %D2 Select 2K dictionary FLOW CONTROL Type: Configuration Format: AT [cmds] \Gn [cmds] Description: Selects modem port flow control Command Function \G0 Flow control disabled \G1 Flow control enabled FLOW CONTROL TYPE Type: Configuration Format: AT [cmds] \Qn [cmds] Description: Sets type of flow control used by modem Command Function \Q0 Flow control disabled \Q1 Bidirectional XON/XOFF flow control enabled \Q2 CTS flow control by DCE enabled \Q3 Bidirectional RTS/CTS flow control enabled \Q4 Unidirectional XON/XOFF flow control by DCE enabled INACTIVITY TIMER Type: Configuration Format: AT [cmds] \Tn [cmds] Default: 0 Range: 0-90 Unit: 1 minute Description: Sets the length of time that the modem does not receive information before it disconnects. \T=0 will disable timer. MNP RESULT CODES Type: Configuration Format: AT [cmds] \Vn [cmds] Description: Selects MNP result codes Command Function \V0 MNP result codes disabled \V1 MNP result codes enabled REPORT INFORMATION Type: Immediate Format: AT [cmds] In [cmds] Description: Displays information requested Command Function I0 Reports 3 digit product code I1 Reports ROM checksum I2 Reports OK I3 Reports firmware revision level I4 Reports configuration settings XON/XOFF PASS-THROUGH Type: Configuration Format: AT [cmds] \Xn [cmds] Description: Selects whether XON/XOFF signals are sent to remote modem Command Function \X0 XON/XOFF signals trapped by local modem \X1 XON/XOFF passed through local modem