UNIDENTIFIED MODEM ANCHOR 2400E (REV.3) Card Type Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 2400bps Maximum Fax Rate 9600bps Data Bus External Fax Class Unidentified Data Modulation Protocol Bell 103J/212A ITU-T V.21, V.22, V.22bis Fax Modulation Protocol ITU-T V.27ter, V.29 [Image] CONNECTIONS Function Label Function Label Line out CN1 RS-232/422 CN3 Line in CN2 DC power CN4 USER CONFIGURABLE SETTINGS Setting Label Position DTR normal SW1/1 On DTR forced high SW1/1 Off CD normal SW1/2 On CD forced high SW1/2 Off AT command set enabled SW1/3 Off AT command set disabled SW1/3 On Factory configured - do not alter SW1/4 N/A DIAGNOSTIC LED(S) LED Color Status Condition MR Red On Power is on MR Red Off Power is off RD Red On Modem is receiving data RD Red Off Modem is not receiving data SD Red On Modem is transmitting data SD Red Off Modem is not transmitting data AA Red On Auto-answer enabled AA Red Off Auto-answer disabled CD Red On Carrier signal detected CD Red Off Carrier signal not detected OH Red On Modem is off-hook OH Red Off Modem is on-hook HS Red On Modem is operating at 2400bps HS Red Off Modem is operating at slower than 2400bps TR Red On DTR signal is high TR Red Off DTR signal is low Proprietary AT Command Set See document V1876 for a full command summary.