WISECOM, INC. DATA/FAX MODEM 14.4 V.32BIS Card Type Fax, Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 8-bit ISA Fax Class Class I Data Modulation Protocol Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis Fax Modulation Protocol ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label Line in CN1 Line out CN2 SERIAL PORT ADDRESS Setting JP8/1 JP8/2 COM1 (3F8h) Pins 1 & 2 closed Pins 1 & 2 closed COM2 (2F8h) Pins 2 & 3 closed Pins 1 & 2 closed COM3 (3E8h) Pins 1 & 2 closed Pins 2 & 3 closed COM4 (2E8h) Pins 2 & 3 closed Pins 2 & 3 closed INTERRUPT Setting JP8/3 JP8/4 JP8/5 JP8/6 2 Closed Open Open Open 3 Open Closed Open Open 4 Open Open Closed Open 5 Open Open Open Closed Proprietary AT Command Set AUTO-RETRAIN - FALLBACK/FALLFORWARD Type: Configuration Format: AT [cmds] %En [cmds] Description: Controls auto-retrain mode and fallback/fall forward Command Function %E0 Auto-retrain disabled %E1 Auto-retrain enabled %E2 Fallback/fall forward enabled BIT MAPPED REGISTERS Register Default S14 Unidentified S16 0 S21 Unidentified S22 Unidentified S23 Unidentified S27 Unidentified S31 Unidentified S41 131 BREAK TYPE Type Configuration Format AT [cmds] \Kn [cmds] Default 5 Range 0-5 Description Configures action of break signal CONNECT MODE Type: Configuration Format: AT [cmds] \Nn [cmds] Description: Sets connect mode Command Function \N0 Normal mode enabled FAX TRANSMIT LEVEL Type: Register Format: AT [cmds] S92=n [cmds] Default: 10 Range: 0-15 Unit: -1dBm Description: Controls fax transmission level FLASH DIAL MODIFIER TIME Format AT [cmds] S29=n [cmds] Default: 0 Range: 0-255 Unit: .01 second Description: Time the modem will go on-hook upon receiving the ! dial modifier in dial string. FLOW CONTROL CHARACTER - XOFF Type: Register Format: AT [cmds] S33=n [cmds] Default: 19 Range: 0-255 Unit: ASCII Description: Sets the character used to represent XOFF FLOW CONTROL CHARACTER - XON Type: Register Format: AT [cmds] S32=n [cmds] Default: 17 Range: 0-255 Unit: ASCII Description: Sets the character used to represent XON LINE SIGNAL LEVEL Type: Immediate Format: AT [cmds] %L [cmds] Description: Returns a value which indicates the received line signal level LINE SIGNAL QUALITY Type: Immediate Format: AT [cmds] %Q [cmds] Description: Returns a value which indicates line signal quality RPI Type: Configuration Format: AT [cmds] +Hn [cmds] Description: Controls RPI and sets DTE speed Command Function +H0 RPI disabled +H1 RPI enabled, DTE speed 19200bps +H2 RPI enabled, DTE speed 38400bps +H3 RPI enabled, DTE speed 57600bps SLEEP TIMER Format AT [cmds] S24=n [cmds] Default: 0 Range: 0-255 Unit: 1 second Description: Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode. TRANSMIT ATTENUATION LEVEL Type: Register Format: AT [cmds] S91=n [cmds] Default: 10 Range: 0-15 Unit: -1dBm Description: Controls transmission attenuation level