BOCA RESEARCH, INC. BOCA OFFICE COMMUNICATOR V.34 (FDVSP34I) Card Type Modem/speakerphone Chip Set Unidentified Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus 8 bit ISA Fax Class Class I & II Data Modulation Protocol Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation Protocol ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label Line in CN1 Microphone CN3 Line out CN2 Speaker CN4 Proprietary AT Command Set AUTO RETRAIN FALLBACK/FALLFORWARD Type Configuration Format AT [cmds] %En [cmds] Description Controls auto retrain mode and fallback/fallforward Command Function %E0 Auto retrain disabled %E1 Auto retrain enabled %E2 Auto retrain and fallback/fallforward enabled BREAK SEND Type Configuration Format AT [cmds] \Bn [cmds] Default 3 Range 1-9 Unit .1 second Description Sends break of n length to remote modem BREAK TYPE Type: Configuration Format: AT [cmds] \Kn [cmds] Description: Configures action of break signal. Command Break from DTE Break from DTE Break from DTE while in normal while in direct while in mode mode reliable mode \K0 Enter command Buffers cleared Send break and mode, do not and break sent to enter command mode send break to remote modem remote modem \K1 Buffers cleared Buffers cleared Send break and and break sent and break sent to enter command mode to remote modem remote modem \K2 Enter command Send break to Send break to mode, do not remote modem remote modem send break to immediately immediately remote modem \K3 Send break to Send break to Send break and remote modem remote modem enter command mode immediately immediately \K4 Enter command Send break to Send break to mode, do not remote modem with remote modem send break to transmitted data immediately remote modem \K5 Send break with Send break to Send break to transmitted data remote modem with remote modem transmitted data immediately COMPRESSION Type Configuration Format AT [cmds] %Cn [cmds] Description Selects data compression Command Function %C0 Data compression disabled %C1 MNP5 enabled %C2 V.42bis enabled %C3 MNP5 and V.42bis enabled FAX TRANSMIT LEVEL Type Register Format AT [cmds] S92=n [cmds] Default 10 Range 0-15 Unit -1dBm Description Controls fax transmission level FLASH DIAL MODIFIER TIME Type Register Format AT [cmds] S29=n [cmds] Default 10 Range 0-255 Unit 1ms Description Time the modem will go on-hook upon receiving the ! dial modifier in dial string FLOW CONTROL CHARACTER - XOFF Type Register Format AT [cmds] S33=n [cmds] Default 19 Range 0-255 Unit ASCII Description Sets the character used to represent XOFF FLOW CONTROL CHARACTER - XON Type Register Format AT [cmds] S32=n [cmds] Default 17 Range 0-255 Unit ASCII Description Sets the character used to represent XON LINE SIGNAL LEVEL Type Immediate Format AT [cmds] %L [cmds] Range 009-043 Unit -1dBm Description Reports received signal level MAXIMUM BLOCK SIZE FOR TRANSMISSION Type Configuration Format AT [cmds] \An [cmds] Description Sets the maximum transmittable block size. Command Function \A0 Maximum MNP block size is 64 characters. \A1 Maximum MNP block size is 128 characters. \A2 Maximum MNP block size is 192 characters. \A3 Maximum MNP block size is 256 characters. MODEM PROTOCOL Type Configuration Format AT [cmds] \Nn [cmds] Description Sets connect mode Command Function \N0 Normal mode enabled \N1 Direct mode enabled \N2 Reliable mode enabled \N3 MNP or normal mode enabled \N4 LAP-M reliable enabled \N5 MNP reliable mode enabled PROTOCOL/SPEED Type Register Format AT [cmds] S37=n [cmds] Description Selects switched line speed Command Function S37=0 Connect at highest common speed S37=1 Connect at 300bps S37=2 Connect at 300bps S37=3 Connect at 300bps S37=4 Not used S37=5 Connect at 1200bps S37=6 Connect at 2400bps S37=7 Connect at V.23 S37=8 Connect at 4800bps S37=9 Connect at 9600bps S37=10 Connect at 12.0Kbps S37=11 Connect at 14.4Kbps S37=12 Connect at 7200bps REPORT SIGNAL QUALITY Type Immediate Format AT [cmds] %Q [cmds] Description Reports signal quality. Retrain threshold is 008 or greater. SLEEP INACTIVITY TIMER Type Register Format AT [cmds] S24=n [cmds] Default 0 Range 0-255 Unit Second Description Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode BIT MAPPED REGISTERS Register Default S14 138 S16 0 S21 4 S22 117 S23 54 S27 9 S28 0 S31 2 S39 3 S40 105 S41 3