PATTON ELECTRONICS COMPANY 1070 Modem Type Data (synchronous) Maximum Data Rate 19.2Kbps Data Bus External Data Modulation Protocol Proprietary [Image] CONNECTIONS Purpose Location Purpose Location Line in CN1 Ground CN5 RS-232/422 CN2 Receive CN6 DC power CN3 Loopback test SW2 Transmit CN4 SPEED Setting SW1/A SW1/B SW1/C 1.2Kbps On On On 2.4kbps Off On On 4.8Kkbps On Off On 7.2kbps On On Off » 9.6kbps Off Off On 14.4kbps Off On Off 19.2bps On Off Off 19.2kbps Off Off Off TRANSMIT CLOCK Setting SW1/E » Internal Off External On CARRIER SIGNAL Setting SW1/H Forced high Off » Carrier signal follows RTS On RTS/CTS DELAY Setting SW1/E SW2/F 0ms On On 8ms On Off 53ms Off On LOOPBACK TEST Setting SW2 Local analog loopback test enabled Off Remote analog loopback test enabled On FACTORY CONFIGURED SETTINGS Jumper Setting SW1/C N/A DIAGNOSTIC LED(S) LED Color Status Condition PWR Red On Power is on PWR Red Off Power is off TD Red On Modem is not transmitting data TD Red Off Modem connection is broken TD Red/Green Blinking Modem is transmitting data RD Red On Modem is not receiving data RD Red Off Modem connection is broken RD Red/Green Blinking Modem is receiving data RTS Red On RTS signal is low RTS Green On RTS signal is high CD Red On Carrier signal is low CD Green On Carrier signal is high TEST Red Off Modem is not in test mode TEST Red On Modem is in test mode