VISIONETICS INTERNATIONAL

VIGA+

Category                   Video
Video Types Supported      XVGA
Video Processor            Unidentified
Highest Resolution         1024 x 768
Supported
Data Bus Type              16-bit ISA
Memory Type                VRAM
Maximum Onboard Memory     2MB

[Image]

                                CONNECTIONS

       Purpose          Location            Purpose            Location

  15-pin analog            CN1        VGA feature connector       J1
  video port

  15-pin analog            CN2
  video port

                          VIDEO OUTPUT SELECTION

      Setting          SW3/1         SW3/2         SW3/3         SW3/4

  H-synch/V-synch       On            Off           On            Off

      S-video           Off           On            Off           On

                            INTERRUPT SELECTION

         IRQ             SW2/1        SW2/2         SW2/3        SW2/4

  »      Disabled         Off          Off           Off          Off

            3             On           Off           Off          Off

            7             Off           On           Off          Off

            10            Off          Off           On           Off

            15            Off          Off           Off           On

                        SHARED INTERRUPT SELECTION

                 Setting                               SW2/5

  »                Disabled                             Off

                    Enabled                              On

                        BASE I/O ADDRESS SELECTION

       Address              SW1/1             SW1/2            SW1/3

  »        220h               On               Off               On

           200h               On                On               On

           210h               On                On              Off

           230h               On               Off              Off

           240h              Off                On               On

           250h              Off                On              Off

           260h              Off               Off               On

           270h              Off               Off              Off

                      BASE I/O ADDRESS MODE SELECTION

                   Mode                                 SW1/4

  »             Non - contiguous                          On

                   Contiguous                            Off

  FACTORY CONFIGURED - DO NOT ALTER

      Switch            Position

       SW1/5               Off