PERIPHERAL MARKETING, INC.

FASTCARD IV

Category               Multi-I/O - Memory Expansion
Data Bus Type          16-bit ISA
Memory Type            DRAM
Maximum Onboard Memory 2048KB

[Image]

                                CONNECTIONS

          Setting              Location        Purpose         Location

  DB-25 female                   CN1       34-pin daughter       CN4/A
  connector-parallel port                  board connector

  DB-9 male connector            CN2       34-pin socket         CN4/B
  serial port                              main board
                                           connector

  16-pin game port               CN3

  Note: CN4/B is located on the reverse side of the board, here it is
  shown on the same side as the memory.

                       SERIAL PORT CTS SETTINGS

         Setting                   JP1                    JP2

  Driver controlled CTS          Closed                  Open

     Force CTS true               Open                  Closed

                       SERIAL PORT DCD SETTINGS

         Setting                   JP3                    JP4

  Driver controlled DCD          Closed                  Open

     Force DCD true               Open                  Closed

                       SERIAL PORT DSR SETTINGS

         Setting                   JP5                    JP6

  Driver controlled DSR          Closed                  Open

     Force DSR true               Open                  Closed

                     PARITY SELECT

          Setting                       JP7

  Parity checking enabled             Closed

  Parity checking disabled             Open

        MEMORY SIZE CONFIGURATION

       Setting               JP8

        256KB         Pins 1 & 2 closed

        512KB         Pins 2 & 3 closed

       >512KB              All open

                            DRAM CONFIGURATION

     Size          Bank 0         Bank 1        Bank 2         Bank 3

     256KB      (9) 64K x 4        NONE          NONE           NONE

     512KB      (9) 64K x 4    (9) 64K x 4       NONE           NONE

     786KB      (9) 64K x 4    (9) 64K x 4    (9) 64K x 4       NONE

    1024KB      (9) 64K x 4    (9) 64K x 4    (9) 64K x 4    (9) 64K x 4

                    DAUGHTER BOARD DRAM CONFIGURATION

     Size          Bank 4         Bank 5        Bank 6         Bank 7

    1280KB      (9) 64K x 4        NONE          NONE           NONE

    1536KB      (9) 64K x 4    (9) 64K x 4       NONE           NONE

    1792KB      (9) 64K x 4    (9) 64K x 4    (9) 64K x 4       NONE

    2048KB      (9) 64K x 4    (9) 64K x 4    (9) 64K x 4    (9) 64K x 4

                        USER CONFIGURABLE SETTINGS

          Setting                  Jumper                 Setting

  Parallel port set to               JP9             Pins 1 & 2 closed
  IRQ5

  Parallel port set to               JP9             Pins 2 & 3 closed
  IRQ7

  Serial port set to IRQ3           JP10             Pins 1 & 2 closed

  Serial port set to IRQ4           JP10             Pins 2 & 3 closed

  Game port enabled                 JP11                   Closed

  Game port disabled                JP11                    Open

     PARALLEL PORT SELECT

  Setting     JP12      JP13

   LPT1       Open     Closed

   LPT2      Closed     Open

      SERIAL PORT SELECT

  Setting     JP14      JP15

   COM1       Open     Closed

   COM2      Closed     Open

                        MULTIPLE CARD CONFIGURATION

         Setting                    JP16                    JP17

      Card number 1                 Open                    Open

      Card number 2                 Open                   Closed

      Card number 3                Closed                   Open

      Card number 4                Closed                  Closed

  Note: The Fastcard IV allows up to 4 other Fastcard IV cards in a
  single system. The above settings allow for the designation of each
  board.

                              PASSWORD SELECT

                Setting                               SW1/1

    Software menu password enabled                      On

    Software menu password disabled                    Off

       Note:This board comes with a utility disk providing a menu system
       for configuring the board. If this switch is set the menu system
       will not function with out a password given. To bypass the
       password and reset the system disable the option.

           ROM ADDRESS SELECT

   Address      SW1/2    SW1/3     SW1/4

   Disabled      Off      Off      Off

    A000h        Off      Off       On

    C800h        Off       On       On

    D000h         On      Off      Off

    D800h         0n      Off       On

    E000h         On       On      Off

    E800h         On       On       On

                            RAM ADDRESS SELECT

    System       Starting      SW1/5       SW1/6      SW1/7       SW1/8
     Ram         Address

     64K          1000h         Off         Off        Off         On

    128K          2000h         Off         Off        On          Off

    192K          3000h         Off         Off        On          On

    256K          4000h         Off         On         Off         Off

    320K          5000h         Off         On         Off         On

    384K          6000h         Off         On         On          Off

    448K          7000h         Off         On         On          On

    512K          8000h          On         Off        Off         Off

    576K          9000h          On         Off        Off         On

    640K            -           Off         Off        Off         Off