PIXELWORKS, INC.

ULTRA CLIPPER GRAPHICS UA1024/V

Category                   Video
Video Types Supported      XVGA
Video Processor            Pixelworks, Inc.(exact location unidentified)
Highest Resolution         1280 x 1024
Supported
Data Bus Type              16-bit ISA
Memory Type                DRAM
Maximum Onboard Memory     875KB

[Image]

                                CONNECTIONS

     Purpose         Location             Purpose            Location

  15-pin analog         CN1            Daughterboard         CN3 & CN4
  video port                             connector

                        BASE I/O ADDRESS SELECTION

              » Address                                WD

  »                330h                         Pins 1 & 2 closed

  »                 340                         Pins 2 & 3 closed

                               DMA SELECTION

        » Channel                   WA                       WB

  »           6             Pins 1 & 2 closed        Pins 1 & 2 closed

  »           5             Pins 4 & 5 closed        Pins 4 & 5 closed

  »           7             Pins 2 & 3 closed        Pins 2 & 3 closed

                            INTERRUPT SELECTION

                » IRQ                                  WC

  »                 10                         Pins 1 & 2 closed

  »                 11                         Pins 2 & 3 closed

  »                 12                         Pins 4 & 5 closed

                        MONITOR SYNC MODE SELECTION

         » Mode                    SW1/3                   SW1/4

  »           3                     Off                     Off

  »           4                     On                      Off

  »           5                     On                       On

  CGA EMULATION CONFIGURATION

    Setting          SW1/1

    Enabled            On

    Disabled          Off

  VGA PASS-THROUGH CONFIGURATION

     Setting           SW1/2

     Enabled             On

    Disabled            Off

[Image]

                   CONNECTIONS

  Purpose                        Location

  VGA pass-through port            CN2

                        MONITOR SYNC MODE SELECTION

    » Mode          SW2/1          SW2/2         SW2/3          SW2/4

  »      3           On             On            Off            Off

  »      4           On             Off           Off            Off

  »      5           Off            Off            On            Off