AUVA COMPUTER, INC. HEGA II Category Video card Video Type EGA/Monochrome Video Processor Unidentified Highest Resolution 800 x 600 Supported Data Bus Type 8-bit ISA Memory Type DRAM Maximum Onboard Memory 64KB (Location unknown) [Image] CONNECTIONS Purpose Location Purpose Location 9-pin analog video CN1 Light pen connector CN4 port RCA port 1 CN2 Feature connector CN5 RCA port 2 CN3 MONITOR TYPE SELECT Type SW1/1 SW1/2 SW1/3 SW1/4 Monochrome Off Off On Off Standard RGB Off Off Off On Enhanced RGB Off On On Off AUTOSWITCHING SELECT Setting SW1/5 Enabled On Disabled Off DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 Monochrome Off Off On Off Standard RGB On Off Off On Enhanced RGB (200 line) On On On Off Enhanced RGB (350 line) Off On On Off Note:These settings apply when the HEGA II is the only video card present. DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 40 column On Off Off On Off standard RGB 80 column Off Off Off On Off standard RGB Enhanced RGB On On On Off Off (200 lines) Enhanced RGB Off On On Off Off (350 lines) Note:These settings apply when the HEGA II and a monochrome display adapter are in use, with the HEGA primary. DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 40 column On On On On Off standard RGB 80 column Off On On On Off standard RGB Enhanced RGB (200 On Off On On Off lines) Enhanced RGB (350 Off Off On On Off lines) Note:These settings apply when the HEGA II and a monochrome display adapter are in use, with the monochrome primary. DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 40 column On Off On Off Off standard RGB 80 column Off Off On Off Off standard RGB Note:These settings apply when the HEGA II and a CGA adapter are in use, with the HEGA II primary. DISPLAY CONFIGURATION Monitor Type SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 40 column On On Off On Off standard RGB 80 column Off On Off On Off standard RGB Note:These settings apply when the HEGA II and a CGA adapter are in use, with the CGA primary. FACTORY CONFIGURED SETTINGS Jumper Setting JP1 Pins 1 & 2 closed