PIXELWORKS, INC.

MICRO CLIPPER

Category                   Video
Video Types Supported      CGA, VDI, CGI
Video Processor            Unidentified
Highest Resolution         1024 x 816
Supported
Data Bus Type              16-bit ISA and 8-bit ISA
Memory Type                VRAM
Maximum Onboard Memory     512 KB

[Image]

                                CONNECTIONS

       Purpose         Location             Purpose            Location

  9-pin analog            J1        CGA/EGA pass-through          J2
  video port

                    DMA CHANNEL SELECTION

       Channel                WA                   WB

          6            Pins 1 & 2 closed   Pins 1 & 2 closed

          7            Pins 3 & 4 closed   Pins 3 & 4 closed

           INTERRUPT SELECTION

         IRQ                  WC

         10           Pins 1 & 2 closed

         11           Pins 3 & 4 closed

         12           Pins 5 & 6 closed

                     RESOLUTION SELECTION

     Resolution               WD                 SW1/1

      720 x 560        Pins 1 & 2 closed           On

     1024 x 816        Pins 2 & 3 closed          Off

        MONITOR SYNC CONFIGURATION

        Mode                  WE

      Internal        Pins 1 & 2 closed

      External        Pins 3 & 4 closed

  ADDRESS SELECTION

  Address     SW1/2

   330h        Off

   340h        On

  VIDEO PASS-THROUGH CONFIGURATION

       Mode              SW1/3

     Disabled             Off

     Enabled              On

  CGA EMULATION CONFIGURATION

      Mode           SW1/4

    Disabled          Off

    Enabled            On

                       MISCELLANEOUS TECHNICAL NOTE

  This board is made up of two cards, attached at the corners. It must be
  installed in two slots simultaneously. When viewed from the backplate
  end, the card on the right is an 8-bit ISA, and the card on the left is
  a 16-bit ISA.