DIAMOND FLOWER, INC.

WG-9000VL

Category                    Video
Video Types Supported       XVGA
Video Processor             Weitek 9000
Highest Resolution          1280 x 1024
Supported
Data Bus Type               32-bit VESA Local Bus
Memory Type                 VRAM
Maximum Onboard Memory      2048KB

[Image]

                                CONNECTIONS

       Purpose          Location            Purpose            Location

  15 pin analog            C1         VESA Feature                J1
  video port                          connector

                         BIOS MEMORY CONFIGURATION

          Address                   JP1/A                   JP1/B

  »          C000h                  Closed                 Closed

             D000h                  Closed                  Open

             E000h                   Open                  Closed

             F000h                   Open                   Open

       Note: If VGA card is used in a system with a Weitek 4167 or 3167
       math co-processor installed, memory location C000h cannot be
       selected.

                        DISPLAY MEMORY FRAME BUFFER

        Address Width                JP1/C                  JP1/G

  »   16-bit memory access            Open                  Closed

       8-bit memory access           Closed                  Open

                         VIDEO INTERRUPT SELECTION

                 IRQ 2/9                               JP1/D

  »               Disabled                             Open

                   Enabled                            Closed

                           WAIT STATE SELECTION

             Zero Wait State                           JP1/E

  »               Disabled                             Open

                   Enabled                            Closed

                       BIOS ROM ACCESS CONFIGURATION

             Address Width                             JP1/F

  »        16-bit BIOS ROM access                      Open

            8-bit BIOS ROM access                     Closed

                 SECONDARY VGA CARD CONFIGURATON

  Secondary VGA Card           JP3                   JP4

        Absent               Closed                 Open

      Installed               Open                 Closed

                       MISCELLANEOUS TECHNICAL NOTE

  Note:In order to configure resolution and scan rates, the utility
  software included with the card must be run.