SURECOM TECHNOLOGY CORPORATION EP-201TX Card Type Ethernet Transceiver NIC Type Ethernet Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 100Mbps, 10Mbps Topology Star Wiring Type RJ-45 Unshielded twisted pair Data Bus External [Image] CONNECTIONS Function Label Function Label MII connector CN1 RJ-45 connector CN2 USER CONFIGURABLE SETTINGS Function Label Position » Repeater mode enabled SW1/A On DTE mode enabled SW1/A Off » Half duplex mode enabled SW1/B Off Full duplex mode enabled SW1/B On » Isolation mode disabled SW1/C Off Isolation mode enabled SW1/C On NETWORK SPEED SELECTION Speed SW1/D » 100Mbps On 10Mbps Off DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On 100Mbps selected LED1 Green Off 10Mbps selected LED2 Green On Full duplex mode enabled LED2 Green Off Half duplex mode enabled LED3 Red On Collision detected on network LED3 Red Off No collision detected on network LED4 Green On Data is being received LED4 Green Off Data is not being received LED5 Green On Data is being transmitted LED5 Green Off Data is not being transmitted LED6 Green On Network connection is good LED6 Green Off Network connection is broken LED7 Green On Transceiver is receiving power LED7 Green Off Transceiver is not receiving power