IMC NETWORKS CORPORATION

FT-LANCVR/FO-ST

FT-LANCVR/FO-SINGLE MODE-ST

Card Type               Ethernet Transceiver
NIC Type                Ethernet
Maximum Onboard Memory  Unidentified
Boot ROM                Not available
Network Transfer Rate   10Mbps
Topology                Linear Bus, Star
Wiring Type             Fiber optic cable, AUI transceiver via DB-15 port
Data Bus                External

[Image]

                              CONNECTIONS

        Function           Label            Function           Label

  AUI connector             CN1      ST transmit connector      CN4

  ST transmit connector     CN2      ST receive connector       CN5

  ST receive connector      CN3

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   SQE disabled                               SW1            Off

      SQE enabled                                SW1            On

  »   Alarm enabled                              SW2            On

      Alarm disabled                             SW2            Off

  »   Mode 1 enabled                             SW3            On

      Mode 2 enabled                             SW3            Off

                             DIAGNOSTIC LED(S)

   LED       Color       Status                   Condition

   LED1      Green         On          Valid data detected (CN2 & CN3)

   LED1      Green        Off        Valid data not detected (CN2 & CN3)

   LED2       Red       Blinking     Network connection is broken (CN2 &
                                                    CN3)

   LED2       Red         Off         Network connection is good (CN2 &
                                                    CN3)

   LED3      Green         On         Network connection is good (CN2 &
                                                    CN3)

   LED3      Green        Off        Network connection is broken (CN2 &
                                                    CN3)

   LED4      Green         On          Valid data detected (CN4 & CN5)

   LED4      Green        Off        Valid data not detected (CN4 & CN5)

   LED5       Red       Blinking     Network connection is broken (CN4 &
                                                    CN5)

   LED5       Red         Off         Network connection is good (CN4 &
                                                    CN5)

   LED6      Green         On         Network connection is good (CN4 &
                                                    CN5)

   LED6      Green        Off        Network connection is broken (CN4 &
                                                    CN5)

   LED7      Amber         On                    SQE enabled

   LED7      Amber        Off                   SQE disabled

   LED8      Amber         On           Hardware malfunction detected

   LED8      Amber        Off          Hardware functioning correctly

   LED9       Red          On          Collisions detected on network

   LED9       Red         Off         No collisions detected on network

  LED10      Amber         On              Data is being received

  LED10      Amber        Off            Data is not being received

  LED11      Green         On             Data is being transmitted

  LED11      Green        Off           Data is not being transmitted

  LED12      Green         On        Power is being supplied via the AUI
                                                  connector

  LED12      Green        Off        Power is not being supplied via the
                                                AUI connector

                       MISCELLANEOUS TECHNICAL NOTES

  This transceiver is available with either multi-mode or single-mode ST
  ports