IMC NETWORKS CORPORATION FT-LANCVR/TP Card Type Ethernet Transceiver NIC Type Ethernet Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 10Mbps Topology Linear Bus, Star Wiring Type RJ-45 Shielded twisted pair, RJ-45 Unshielded twisted pair, AUI transceiver via DB-15 port Data Bus External [Image] CONNECTIONS Function Label Function Label AUI connector CN1 RJ-45 crossover CN4 connector RJ-45 crossover CN2 RJ-45 pass-through CN5 connector connector RJ-45 pass-through CN3 connector Note: Each port contains two RJ-45 connectors. Only one may be used at a time. Either the crossover connector which is for connecting to a network interface card, or the pass-through connector which is for connecting to a hub or repeater. USER CONFIGURABLE SETTINGS Function Label Position » SQE disabled SW1 Off SQE enabled SW1 On » Alarm enabled SW2 On Alarm disabled SW2 Off » Mode 1 enabled SW3 On Mode 2 enabled SW3 Off DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On Valid data detected (CN2 or CN3) LED1 Green Off Valid data not detected (CN2 or CN3) LED2 Red Blinking Network connection is broken (CN2 or CN3) LED2 Red Off Network connection is good (CN2 or CN3) LED3 Green On Network connection is good (CN2 or CN3) LED3 Green Off Network connection is broken (CN2 or CN3) LED4 Green On Valid data detected (CN4 or CN5) LED4 Green Off Valid data not detected (CN4 or CN5) LED5 Red Blinking Network connection is broken (CN4 or CN5) LED5 Red Off Network connection is good (CN4 or CN5) LED6 Green On Network connection is good (CN4 or CN5) LED6 Green Off Network connection is broken (CN4 or CN5) LED7 Amber On SQE enabled LED7 Amber Off SQE disabled LED8 Amber On Hardware malfunction detected LED8 Amber Off Hardware functioning correctly LED9 Red On Collisions detected on network LED9 Red Off No collisions detected on network LED10 Amber On Data is being received LED10 Amber Off Data is not being received LED11 Green On Data is being transmitted LED11 Green Off Data is not being transmitted LED12 Green On Power is being supplied via the AUI connector LED12 Green Off Power is not being supplied via the AUI connector