CABLETRON SYSTEMS, INC. E4010 (TP/AUI) Card Type Network Interface Card NIC Type Ethernet Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 10Mbps Topology Linear Bus, Star Wiring Type RJ-45 Unshielded twisted pair, AUI transceiver via DB15 port Data Bus None [Image] CONNECTIONS Function Label Function Label 24 wire ribbon connector CN1 RJ-45 connector CN3 to control board AUI connector CN2 USER CONFIGURABLE SETTINGS Function Label Position SQE enabled SW1 On » SQE disabled SW1 Off CABLE TYPE SELECTION Type SW2 AUI transceiver via DB-15 port Off Unshielded twisted pair On DIAGNOSTIC LED(S) LED Color Status Condition LED1 Yellow Blinking Data is being received LED1 Yellow Off Data is not being received LED2 Green Blinking Connection error detected LED2 Green On Power is on, Network connection is good (RJ-45 connector) LED2 Green Off Power is off, Network connection is broken (RJ-45 connector) LED3 Green Blinking Data is being transmitted LED3 Green Off Data is not being transmitted LED4 Red Blinking Collision detected on network LED4 Red Off No collision detected on network