COMPAQ COMPUTER CORPORATION

NETELLIGENT DUAL 10/100 TX PCI UTP CONTROLLER

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10Mbps, 100Mbps
Topology               Linear Bus
Wiring Type            2 Unshielded twisted pair (RJ-45)
Data Bus               32-bit PCI

[Image]

                              CONNECTIONS

        Function           Label            Function           Label

  UTP connector (RJ-45)     CN1      UTP connector (RJ-45)      CN2

                             DIAGNOSTIC LED(S)

   LED         Color         Status                 Condition

   LED1     Unidentified       On          Network connection is 100Mbps
                                                  (connector 1)

   LED1     Unidentified       Off         Network connection is 10Mbps
                                                  (connector 1)

   LED2     Unidentified       On           Network connection is good
                                                  (connector 1)

   LED2     Unidentified       Off         Network connection is broken
                                                  (connector 1)

   LED3     Unidentified       On          Data is being transmitted or
                                              received (connector 1)

   LED3     Unidentified       Off       Data is not being transmitted or
                                              received (connector 1)

   LED4     Unidentified       On          Network connection is 100Mbps
                                                  (connector 2)

   LED4     Unidentified       Off         Network connection is 10Mbps
                                                  (connector 2)

   LED5     Unidentified       On           Network connection is good
                                                  (connector 2)

   LED5     Unidentified       Off         Network connection is broken
                                                  (connector 2)

   LED6     Unidentified       On          Data is being transmitted or
                                              received (connector 2)

   LED6     Unidentified       Off       Data is not being transmitted or
                                              received (connector 2)