ACCTON TECHNOLOGY CORPORATION

ETHERPAIR-8T

Card Type                  Network Interface Card
NIC Type                   Ethernet
Maximum Onboard Memory     Unidentified
Boot ROM                   Available
Network Transfer Rate      10Mbps
Topology                   Linear Bus, Star
Wiring Type                RJ-45 Unshielded twisted pair, AUI transceiver
                           via DB-15 port
Data Bus                   8-bit ISA

[Image]

                              CONNECTIONS

        Function           Label            Function           Label

  UTP connector (RJ-45)     CN1      AUI connector              CN2

                           DMA CHANNEL SELECTION

      Channel            JP2/G        JP2/H         JP2/I         JP2/J

  »     Disabled         Open          Open          Open         Open

            1           Closed         Open         Closed        Open

            3            Open         Closed         Open        Closed

                        BASE I/O ADDRESS SELECTION

          Setting                    JP2/K                   JP2/L

  »           300h                  Closed                  Closed

              320h                   Open                   Closed

              340h                  Closed                   Open

              360h                   Open                    Open

                            INTERRUPT SELECTION

   IRQ      JP2/A      JP2/B      JP2/C     JP2/D      JP2/E      JP2/F

      2     Closed      Open      Open       Open      Open        Open

  »   3      Open      Closed     Open       Open      Open        Open

      4      Open       Open     Closed      Open      Open        Open

      5      Open       Open      Open      Closed     Open        Open

      6      Open       Open      Open       Open     Closed       Open

      7      Open       Open      Open       Open      Open       Closed

                        CABLE TYPE SELECTION

               Type                              JP4

  AUI transceiver via DB-15 port          Pins 2 & 3 closed

  Unshielded twisted pair                 Pins 1 & 2 closed

                          BOOT ROM CONFIGURATION

                 Setting                               JP1/A

                    Enabled                            Closed

  »                Disabled                             Open

                           ROM ADDRESS SELECTION

       Address              JP1/B             JP1/C            JP1/D

  »        C8000h           Closed           Closed            Closed

           CC000h            Open            Closed            Closed

           D8000h           Closed            Open             Closed

           DC000h            Open             Open             Closed

           E8000h           Closed           Closed             Open

           EC000h            Open            Closed             Open

                DIAGNOSTIC LED(S)

  Note: The function of the LED is unidentified.