GARRETT COMMUNICATIONS

MAGNUM TP1A

Card Type              Ethernet Transceiver
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10Mbps
Topology               Linear Bus, star
Wiring Type            Unshielded twisted pair, Shielded twisted pair

                       AUI transceiver via DB-15 port
Data Bus               External

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  AUI transceiver via         CN1       UTP connector (RJ-45)      CN2
  DB-15

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   SQE enabled                                SW1            On

      SQE disabled                               SW1            Off

                          DIAGNOSTIC LED(S)

  LED     Color    Status                   Condition

  LED1    Green      On                    Power is on

  LED1    Green      Off                  Power is off

  LED2    Green      On          Network connection established

  LED2    Green      Off      Network connection is not established

  LED3   Yellow      On             Data is being transmitted

  LED3   Yellow      Off          Data is not being transmitted

  LED4   Yellow      On              Data is being received

  LED4   Yellow      Off           Data is not being received

                       MISCELLANEOUS TECHNICAL NOTES

  The AUI port should be directly connected to the workstation. If you
  cannot connect directly to the workstation, an AUI drop cable (which
  cannot exceed 3 feet in length) may be used.