ALLIED TELESYN, INC. AT-125, AT-126 Card Type Transceiver NIC Type Ethernet Network Transfer Rate 10Mbps Topology Linear Bus, Star Wiring Type AUI transceiver via DB-15 port Fiber optic cable Data Bus None [Image] CONNECTIONS Function Label Function Label Fiber optic connector - CN1 AUI connector CN3 receive Fiber optic connector - CN2 transmit USER CONFIGURABLE SETTINGS Function Label Position » SQE/Heartbeat switch disabled SW1/1 On SQE/Heartbeat switch enabled SW1/1 Off » Continuous transmit function disabled SW1/2 On Continuous transmit function enabled SW1/2 Off » Link test function - always on SW1/3 On » Factory configured - do not alter SW1/4 On TRANSMIT POWER SELECTION Setting JP1/A JP1/B JP1/C JP2/A JP2/B JP2/C Low Closed Open Open Closed Open Open Medium Open Closed Open Open Closed Open High Open Open Closed Open Open Closed DIAGNOSTIC LED(S) LED Color Status Condition Transmit Unidentified On Data is being transmitted Transmit Unidentified Off Data is not being transmitted Receive Unidentified On Data is being received Receive Unidentified Off Data is not being received Collision Unidentified On Collision detected on network Collision Unidentified Off No collision detected on network Link status Unidentified On Link test function is disabled Link status Unidentified Off Link test function is enabled Power/SQE Yellow On SQE/Heartbeat test is test enabled Power/SQE Green On SQE/Heartbeat test is test disabled