DIGITAL EQUIPMENT CORPORATION

FIBER-OPTIC SAS CONTROLLER (DEFPA-AA),

FIBER-OPTIC SAS ADAPTER (DEFPA-AB)

Card Type              Network Interface Card
NIC Type               FDDI
Maximum Onboard Memory Unidentified
Boot ROM               Unidentified
Network Transfer Rate  100Mbps
Topology               Ring
Wiring Type            Fiber optic cable
Data Bus               32-bit PCI

[Image]

                               CONNECTIONS

              Function                              Label

  Fiber-optic connector - duplex SC                  CN1

                             DIAGNOSTIC LED(S)

    LED       Color         Status                  Condition

   LED1       Green           On           Network connection is good

   LED1       Green        Blinking      Network connection in progress

   LED1       Green          Off          Network connection is broken

   LED1        Red            On                    See Note

   LED1        Red         Blinking             Illegal topology

   LED1        Red           Off          Network connection is broken

  Note: If LED1 is red and on after system boots, indicates broken port
  or Link Confidence Test (LCT) failure; retry loop. If LED1 is red and
  on before system boots, indicates self-test failure.