INFOSYSTEMS, LTD.

FDX-132

Card Type             Network Interface Card
NIC Type              FDDI
Boot ROM              Available
Network Transfer Rate 100Mbps
Topology              Ring
Wiring Type           Fiber optic cable
Data Bus              32-bit VESA Local Bus


[Image]

                                CONNECTIONS

         Function            Label            Function           Label

  Fiber optic connector       CN1
  - ST

                        USER CONFIGURABLE SETTINGS

                Function                      Label           Position

  »   Boot ROM disabled                       JP5/1             Open

      Boot ROM enabled                        JP5/1            Closed

  »   Factory configured - do not             JP5/5              N/A
      alter

  »   Hard configuration mode selected    JP14/pins 3 & 4       Open

      Soft configuration mode selected    JP14/pins 3 & 4      Closed

                        BASE I/O ADDRESS SELECTION

         Address              JP5/2            JP5/3            JP5/4

          200h-21Fh           Closed          Closed           Closed

          220h-23Fh           Closed          Closed            Open

          240h-25Fh            Open           Closed           Closed

          280h-29Fh            Open           Closed            Open

          300h-31Fh           Closed           Open            Closed

  »       320h-33Fh           Closed           Open             Open

          340h-35Fh            Open            Open            Closed

                                       INTERRUPT SELECTION

   IRQ    JP3/1    JP3/2    JP3/3    JP3/4    JP3/5    JP3/6    JP3/7    JP3/8   JP3/9    JP3/10

      3   Closed    Open     Open     Open    Open     Open     Open     Open     Open     Open

      4    Open    Closed    Open     Open    Open     Open     Open     Open     Open     Open

      5    Open     Open    Closed    Open    Open     Open     Open     Open     Open     Open

      7    Open     Open     Open    Closed   Open     Open     Open     Open     Open     Open

      9    Open     Open     Open     Open    Closed   Open     Open     Open     Open     Open

  »   10   Open     Open     Open     Open    Open     Closed   Open     Open     Open     Open

      11   Open     Open     Open     Open    Open     Open     Closed   Open     Open     Open

      12   Open     Open     Open     Open    Open     Open     Open     Closed   Open     Open

      14   Open     Open     Open     Open    Open     Open     Open     Open    Closed    Open

      15   Open     Open     Open     Open    Open     Open     Open     Open     Open    Closed

                              TECHNICAL NOTE

  Note: When the board is operated in soft configuration mode, jumpers
  JP5 and JP3 must be open.

  JP14/pins 1 & 2 function to toggle I/O address selection.