ANCOR COMMUNICATIONS, INC.

FCS 266 PCI, FCS 1062 PCI

NIC Type               Fiber Channel
Processor              Intel i960
Processor Speed        33MHz
Chipset                Ancor Communications VHSCI 4
Maximum Onboard Memory 2MB VRAM/512KB SRAM/256KB Flash ROM/128KB ROM
Network Transfer Rate  265.6125Mbps (FCS 266 PCI)

                       1062.5Mbps (FCS 1062 PCI)
Data Bus               32-bit PCI
Topology               Star/Peer-Peer
Wire Type              Fiber optic cable
Boot ROM               Not available

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Receive fiber optic SC      CN1      Transmit fiber optic SC      CN2
  connector                            connector

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

  »   Factory configured - do not alter          JP1           Open

                             DIAGNOSTIC LED(S)

    LED          Color           Status                Condition

    LED1      Unidentified         On           Card is receiving data

    LED1      Unidentified         Off        Card is not receiving data

    LED2      Unidentified         On          Card is transmitting data

    LED2      Unidentified         Off          Card is not transmitting
                                                         data

    LED3         Green          Blinking           Normal operation

    LED3         Green          1 blinks      EPROM failed checksum test

    LED3         Green          2 blinks        Processor memory failed
                                                       self-test

    LED3         Green          3 blinks          Buffer memory failed
                                                       self-test

    LED3         Green          4 blinks         FPGA failed self-test

    LED3         Green          5 blinks       Flash ROM failed checksum
                                                         test

    LED3         Green          6 blinks          Flash ROM ID failed
                                                       self-test

    LED3         Green          7 blinks       OLC loopback test failed

    LED3         Green          8 blinks        Chipset register failed
                                                       self-test

    LED3         Green          9 blinks        Timer failed self-test

    LED3         Green             Off         Power is off or processor
                                                  is not functioning